Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

300cc Gas Sample Cylinder Heater GCH-300 MicroFlx

Mã sản phẩm: GCH-300
Sử dụng cho Model:
Hãng SX: Microflx
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
300cc Gas Sample Cylinder Heater
Model: GCH-300
Hãng: Microflx

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

The GCH-300 provides a simple, efficient solution for preheating 300cc, 2 inch diameter, gas sample cylinders to comply with natural gas sampling standards (GPA 2166 and API 14.1). The GCH-300 heater is used with either the GCH-140 field controller or the GCH-LP-120 lab controller. The sample cylinder is typically preheated inside your vehicle on the way to, or at the sample location. Heating takes about 10 minutes. Insert a clean empty cylinder into the heater enclosure and connect the controller cable to the heater. Power for the heater is taken from your vehicles standard 12 volt power point or cigarette lighter plug. While heating, the sample cylinder’s temperature can be monitored using the controller’s display. When fully heated, the controller will keep the cylinder at the set temperature (typically 140°F) until you are ready to disconnect the controller from the heater and take the sample. The hot cylinder stays in the heater enclosure until the sampling process is finished. The heaters plastic enclosure provides a safe method to handle the heated cylinder while taking the sample without the need for gloves.


Bình luận