Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Bộ điều khiển đo nồng độ chất hòa tan Controllers CIC-152-N / CIC-152-4 HM Digital

Mã sản phẩm: CIC-152-N / CIC-152-4
Sử dụng cho Model:
Hãng SX: HM Digital
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Controllers
Model : CIC-152-N / CIC-152-4
Hãng : HM Digital

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

- The CIC controllers can monitor and control dosing and/or injection systems. This unit will control 2 separate systems.
- Monitors and controls dosing or injection systems.
- Large, bright tri-color L.E.D. display
- Two adjustable set points keep TDS levels within a range (maximum and minimum TDS/EC levels).
- Minimum and maximum control points will activate relay controls via switching dry contacts.
- The CIC-152 can control two different devices (e.g., a pump and a valve).
- Two alarms (maximum and minimum levels) can be set independently of the control points.
- Digital calibration
- On-screen temperature display
- On-screen range & control indicator lights (green, yellow or red)
- Includes one sensor probe
- Available with the NaCl conversion factor (model CIC-152-N) or the 442TM conversion factor (model CIC-152-4)

Thông số kỹ thuật

- TDS Range: 0 – 5000 ppm (CIC-152-N): 0 – 8500 ppm (CIC-152-4)
- EC Range: 0 – 9999 µS
- Temperature Range: 1-80oC; 33-176oF
- Accuracy: ±2% (of the reading)
- Resolution: 0.1 ppm (0-999); 1 ppm (1000-9999)
- ATC: Yes (1 – 80 degrees Celsius)
- Calibration: Digital (by push button)
- Factory Calibration: 1413 µS
- Conversion Factor: CIC-152-N: NaCl (avg. 0.5); CIC-152-4: 442 (0.4-0.7)
- Set Points: Adjustable by push button. Control Point 2: Maximum TDS Limit. Control Point 1: Lower TDS Level.
- Relay Control: The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum - TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1).
- The contacts are switched back to the normal position once the TDS returns to the acceptable range
- Relay Voltage: 5V (attached devices must have their own power supply)
- Alarm: Two independent alarms (set by user)
- Display: Bright 5/8″ L.E.D. display
- Probe: 1/2″ bushing (NPT), 3 meter (9.8 ft) shielded cable (model SP-1-PSC)
- Power Source: AC 110V / AC 220V
- Dimensions: 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in.)
- Monitor Weight: 241 g (8.5 oz)
- Total (Shipping) Weight: 610 g (1 lb 5.5 oz)

Bình luận