Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Cảm biến đo nhiệt độ GA2610 Labom

Mã sản phẩm: GA2610
Sử dụng cho Model:
Hãng SX: Labom
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Features


Hygienic temperature measurement, no contact to medium
For pipe diameter 4…300 mm
Various clamping elements for process connection
Measuring system patented
High accuracy, fast response

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Constructional design / case
Mechanical design The measuring insert is suited with an especially fast operating silver temperature sensor. Constant pressure is applied to the surface of the pipe by the spring force. The replaceable measuring insert is pressed against the pipe surface being measured by a pre-defined spring force. Because the insert is held permanently in the same installation position, all measurements taken are reproducible.
Electrical connection (options) - circular connector with screw plug M12
- field housing, rotatable, positionable through ± 170°; screw cap, mat. stainless steel mat.-no.1.4305 (303)
degree of protection IP 67 according to DIN EN 60529
Clamping elements Material: temperature-resistant high performance plastics with integrated isolating system, hygienic design.
Further temperature ranges or other materials upon request.
Ambient temperature influence approx. 0,2 %/10 K
Process temperature -40...+150 °C
Degree of protection IP 65
Measuring insert Mat. stainless steel Ø 6 mm, hygienic design.
Measuring element from silver, thermally isolated with plastic insert. Measuring insert screwed into the connection head under spring tension.
Use heat sink compound as per data sheet T6-030.
Measuring resistor Pt 100 process optimized for steam sterilisation, measuring range 100 °C up to 150 °C.
alternative Pt 100 per DIN EN 60751 class A in 3-wire technology, for measuring range - 40 °C up to 150 °C
Accuracy (Clamp-on system) Integrated: Pt 100 process optimized, accuracy of system in the range 100 °C up to 150 °C
(Ta - TM) x 0,01 *
alternative Integrated: Pt 100 per DIN EN 60751, class A, accuracy of system in the range - 20 °C up to 150 °C
(Ta - TM) x 0,02 *
  Ta = ambient temperature
TM = media temperature
* use of heat sink compound
Response time (including pipe) t90 = 8...15 s
Pipe nominal sizes Suited for all standard nominal sizes. Dimensions see order details.
Weights (Clamping block) With circular connector M12:
pipe-Ø ≤ 17,2 mm: approx. 100 g
pipe-Ø ≥ 18,0 mm: approx. 200 g
with field housing: approx. 400 g
with transmitter integrated in the circular connector M12:
pipe-Ø ≤ 17,2 mm: approx. 130 g
pipe-Ø ≥ 18,0 mm: approx. 230 g
Integrated transmitter Suitable Pt 100 transmitters can be integrated:
a) transmitter for head mounting with field housing
b) transmitter, type PA 2430, for circular connector M12
see product group T4
LED-on-site indication See Clamp-on GS with 4 digit LED display, can be rotated and mirror-imaged, data sheet T4-034-1
Information on other models see order details or upon request.

Bình luận