Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Đồng hồ đo nhiệt độ BN/DN ASK

Mã sản phẩm: BN/DN
Sử dụng cho Model:
Hãng SX: ASK
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Accurate temperature measurement!

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Features

This product is a steam pressure indicating type remote. Basically it is the same as the mercury pressure thermometer. Instead of mercury, however, nonpoisonous organic liquid is used as the thermo-sensitive liquid.
This correspondence between saturated steam pressure and temperature is not a linear relationship as in the case of expansion pressure of mercury. A logarithmic curve is created, and the scale is gradually expanded at a high-order temperature rather than at a low-order temperature.
Since we use our unique two-fluid system, the intermediate conduit is hardly affected by outside air temperature. Temperature indication is very accurate. The effect is outstanding especially for the longer conduit.
The intermediate conduit is protected by an SUS304 flexible tube.

Type

BN - 60 - AG - 050 - 2 - R1/2 -   
num num num num num num num
num Model BN : Wall-mounted type
DN : Embedded type
num Size
60 :  ø60mm
75 :  ø75mm
100 :  ø100mm
num Case profile (dynamic cart processing)
AG  : Color/silver lower fetching type - set to BN
AH  : Color/silver rear fetching type - set to DN (ø60 only)
CH  : Color/black rear fetching type - set to DN
num Temperature range
050 :  0~ 50℃
080 :  0~ 80℃
0100 :  0~ 100℃
0120 :  0~ 120℃
0150 :  0~ 150℃
0200 :  0~ 200℃  (ø75、ø100 only)
num Lead length Standard length 2m
num Screw diameter R1/2
num Thermo section Unmarked : ø8x100mm Brass (standard)
U : With protection tube ø11x10mm (Material : SUS304)


Size Table

Model Size A B B1 C D E D1 Weight
BN 60 69 (34) 89 78 4.5 620g
75 85 (34) 105 95 4.5 630g
100 110 (36) 136 122 5.5 850g
DN 60 69 15 19 89 78 4.5 65 620g
75 85 14 20 105 95 4.5 80 630g
100 110 15 21 136 122 5.5 106 850g


Caution of use

  • Mount the thermometer vertically. Mount the thermo section so that the thermo cylinder is set horizontally or the end faces downwards.
  • The thermometer mounting position has been adjusted so that the thermo section is set about 600mm below the support main unit.
  • An excessive upward or downward change of the position of the thermo section may cause an indication error. If the position is to be changed by plus-or-minus 1m, please contact when placing your order.
* For any other questions on the specifications, please contact us.


Bình luận