Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Đồng hồ đo nhiệt độ FU2430 Labom

Mã sản phẩm: FU2430
Sử dụng cho Model:
Hãng SX: Labom
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Features

Case, measuring system and wetted parts of stainless steel
Case NS 100/160, degree of protection IP 66
Stem diameter 6, 8 and ≥ 10 mm
Short immersion lengths of the stem may be used
Accuracy class 1 or 2 as per DIN 16196, depending on range

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Constructional design / case
Case high quality bayonet ring case NS 100/160 material: st. steel mat.-no. 1.4301 (304)
Degree of protection (EN 60529) IP 66
Measuring element bourdon tube dead zone free with inert gas filling
Capillary stainless steel material no. 1.4571 (316Ti) resp. 1.4404 (316L) in different lengths with buckling protection, coated with protective tube upon request, alternatively with sliding screwing
Temperature detecting element stainless steel material no. 1.4404 (316L), diameter 6, 8 and ≥ 10 mm, can be supplied in standard lengths. Active lengths depend on temperature detecting element diameter, see order details, other values upon request
Case filling liquid filling Labofin
Process connection rigid temperature detecting element, connected via capillary radially protruding at bottom resp. at rear. Different connections can be supplied, see order details
Movement stainless steel with compensation
Scale pure aluminium, white with black inscription. Option: with marking
Pointer pure aluminium, black with micro adjusting device for zero-point correction
Window non splintering laminated glass. Option: non splintering plastic (Macrolon) with contact lock
Case seal sealing ring: Perbunan
filling plug: Desmopan
Nominal ranges per EN 13190, max. -100...700 °C, measuring spans ≥ 60 °C
Accuracy class data per DIN 16196 (depending on range) for all temperature detecting elements with diameter d5 and standard immersion length l1 - see data sheet T3-029
Ambient temperature per EN 13190 ambient temperatures that deviate from EN are to be specified
Storage and transport temperature per EN 13190, max. -20...+60 °C
  For measuring devices with inductive contact type SJ2-S1N (NS 100, double contact): For safe operation refer to TA_044!
Electrical connection connection plug with cable gland M 20 x 1.5 and removable test cover, mat. Macrolon
Switch function Touch contacts or inductive contact devices see order code. Further technical details see operating instructions BA_066 and TA_039.
Mounting stand-alone mounting with wall bracket ; alternatively with flange for surface mounting or for flush mounting with DIN mounting flange
Weights DN 100, without filling: approx. 1.1 kg
DN 100, with filling: approx. 2.0 kg
DN 160, without filling: approx. 2.0 kg
DN 160, with filling: approx. 4.3 kg
Instructions for use the loading capacity of the temperature detecting element depends on the following parameters:
1. measured medium
2. measured medium pressure
3. measured medium temperature
4. flow velocity
5. immerison length
6. material
A technical test is necessary where required.

Bình luận