Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Dưỡng ren, calip ren SPS Series Eisen

Mã sản phẩm: SPS Series
Sử dụng cho Model:
Hãng SX: Eisen
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Thread Position Alignment Gauge Pos-T

Thông tin sản phẩm

The thread section serves as the GO side thread plug gauge, allowing for very precise measurement of the hole position.


● Features
The thread section satisfies GO side thread plug gauge standards, so that can do GO check of a tapped hole at the same time.
Checking the squareness is possible by checking the gap with the end face of pin gauge section.
The gauge material is Gauge steel (SKS3, HRC58 or harder), and the gauge has exceptional wear resintance.
This gause is equipped with a removable knurled handle, not to touch the pin gauge section directly (The handle can be removed if it interferes with the measurement).
An inspection report for the thread gauge and pin gauge sections is included with to provide confidence and assurance for users!

● Accuracy
The thread centrality (afferent) acts by fastening, and the thread positioning alignment gauge can maintain the tapped hole center.
⇒Repeatability error of less than 10μ (based on in-house test)
Supporting with the end face of pin gauge section, so that it almost never falls over

Notation Example

 

Dimensions

 

Go Metric Thread Plug Gauge


Type of thread Pitch L D a b Y L1 Type of Gauge Class
M3 0.5 coarse 10 or 22 7 ±0.001 5 2 6 10 GP Ⅱ(JIS Class)







6H (ISO Class)
※M1.4[5H]
M4 0.7 coarse 6
M5 0.8 coarse 8 7
M6 1.0 coarse 9 8 2.5
M7 1.0 coarse 10
M8 1.25 coarse 11 ±0.0015 10 3 10
M8 1.0 fine
M9 1.25 coarse 12
M10 1.5 coarse 13 12
M10 1.25 fine
M10 1.0 fine
M12 1.75 coarse 15 14
M12 1.5 fine
M12 1.25 fine
M14 2.0 coarse 17 14 14
M14 1.5 fine
M14 1.25 fine
M16 2.0 coarse 19
M16 1.5 fine
M18 2.5 coarse 21 ±0.002 16 4
M18 2.0 fine
M18 1.5 fine
M20 2.5 coarse 23
M20 2.0 fine
M20 1.5 fine


  • ※Other specifications are available (effective diameter can be changed for fine, extra-fine, and pre-plating sections).

Unified thread plug gauge

coarse fine L D a b Y L1 Type of gauge Class
No.4-40UNC No.4-48UNF 10 or 22 7 5 2 6 10 GP 2B
(JIS Class)
No.5-40UNC No.5-44UNF 6
No.6-32UNC No.6-40UNF
No.8-32UNC No.8-36UNF
No.10-24UNC No.10-32UNF 8 7
No.12-24UNC No.12-28UNF
1/4-20UNC 1/4-28UNF 9 8 2.5
5/16-18UNC 5/16-24UNF 11 10 3 10
3/8-16UNC 3/8-24UNF 13 12
7/16-14UNC 7/16-20UNF 14 14
1/2-13UNC 1/2-20UNF 16 14 14
9/16-12UNC 9/16-18UNF 17
5/8-11UNC 5/8-18UNF 19
3/4-10UNC 3/4-16UNF 22 16 4
7/8-9UNC 7/8-14UNF 25 20 5
1-8UNC 1-12UNF 28


  • ※Other specifications are available (effective diameter can be changed for fine, extra-fine, and pre-plating sections).

Bình luận