| Comet H0430 Specifications |
| Technical parameters |
Value |
| Output |
RS485 |
| Measured Value |
Temperature |
| Construction Type |
Ambient Air |
| Design |
Industrial |
| Temperature Measuring Range |
-30 to 80 °C |
| Relay Output |
Yes |
| Two-State Input |
Yes |
| Lcd Display |
Yes |
| PoE |
No |
| Maximum switching voltage, current, power of relay output |
50V, 2A, 60VA |
| Audible alarm |
from built-in beeper - switchable |
| Accuracy of temperature output |
±0.4°C |
| Available temperature units |
degrees Celsius, Fahrenheit |
| Signal for binary inputs |
dry contact, open collector or two-state voltage signal. Inputs are not galvanically isolated. |
| Minimum pulse length at binary input |
500 ms |
| Voltage at open contact |
3.3 V |
| Low voltage level |
0 to +0.5 V |
| High voltage level |
+3.0 to +30V |
| Temperature operating range |
-30 to +80°C |
| Temperature operating range of LCD display |
readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C |
| Communication protocol |
ModBus RTU and Advantech ADAM compatible protocol |
| Communication speed |
110 to 115200 Bd |
| IP protection |
IP65 |
| Power |
9-30Vdc, power consumption approximately 1W |
| Dimensions |
136 x 191 x 45 mm (W x H x D), stem length 53 mm |
| Weight |
approximately 350g |
| Warranty |
3 years |