| Model & Part Number |
UG20DL |
| Material thickness digits display |
■
|
| Measurement Mode |
Dual Element: PE, EE (ThruPaint™), PECT Single Element: EEV (ThruPaint™) |
| Measurement Rate Manual: |
4 readings per second |
| Measurement Range |
PE: 0.63 - 500mm (0.025 - 19.999 inches)
EE: 2.54 - 102mm (0.100 - 4.000 inches)
PECT: 0.63 - 500mm (0.025 - 19.999 inches)
PECT: 10.0 - 254mm (0.001 - 0.100 inches)
EEV: 1.00 - 150mm (0.040 - 6.000 inches) |
| Measurement Accuracy |
± 1% or ±0.1mm whichever is the greater
|
| Measurement Resolution |
0.01mm (0.001 inch) |
| Velocity Calibration Range |
1250 - 13,995m/s (0.0492 - 0.5510in/ms) |
| A-Scan |
Stored in memory with each reading for review on PC |
| Calibration setups |
1 user programmable & 8 pre-calibrated velocities for:
aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steel |
| Waterproof - depth ratings |
Maximum depth 300 metres (1,000 feet) - equivalent to IP68 |
| Pulser type |
Dual square wave pulsers |
| Gain |
Automatic gain control (AGC) with 100dB range,
or selectable gain: vlow, low, medium hi or vhi |