Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Máy đo độ ẩm gỗ Ligno-Scanner SDM Moisture Meter Lignomat

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX: Lignomat
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

The Ligno-Scanner SDM clearly outperforms most pinless moisture meters on the market today. The meter has 2 independent sets of calibrations one for measuring 1/4″ deep and one for measuring 3/4″ deep. Dual-depth settings are available for different wood species, drywall, reference scales for concrete and other building materials. 

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Measuring
Range
5-60% dependent upon species setting*
Display 0.1% resolution for the entire range.
Species
Corrections
71 wood group settings, or use the specific gravity of the wood between 0.3 and 1.0 (setting 30-100).Bamboo settings for horizontal, vertical and strand bamboo.
Gypsum
Scale
0-2%
Reference
Scale
0-99 for non-wood building materials3 Reference scales with different sensitivity levels from soft to hard building materials
Calibration
Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
Calibration Check  External calibration check block #TS is available to verify the calibration and functions of meter.
Included Pouch, one 9V battery, manual and laminated wood group chart.
Size Pocket-size  2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
Weight 8 ounces (200g), made out of high-impact plastic
Warranty All moisture meters have a 2 year warranty. Pins and battery are excluded.

The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.

The entire measuring pad has to be on a flat and smooth surface for accurate readings

*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.

The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.


Bình luận