| Test Voltage |
| Applied voltage |
AC 0.05 to 1.00 kV (Frequency 50/60 Hz Switchable) |
| Output capacity |
10 VA (1 kV, 10mA)
Maximum current output: within 60s during continuous test |
| Waveform |
Sine wave (Rate of distortion: Less than 5%, No-load) |
| Voltage regulation |
Less than 10% (No-load→Maximum load) |
| Voltage application method |
Zero-cross Start / End |
| Voltage setting |
Digital setting (resolution: 0.01kV) |
| Voltage Measurement |
| Rectification method |
Average rectified effective value display |
| Measurement range |
0 to 1200V (resolution: 1V) |
| Measurement accuracy |
+/- (1.5% of rdg. +20V) |
| Current Measurement |
| Rectification method |
Peak value display |
| Measurement range |
0.00 to 15.00mA (resolution: 0.01mA) |
| Measurement accuracy |
+/- (2% of rdg. +0.05mA) |
| Judgement of Test Result |
| Judgement method |
Upper limit: Comparison of peak values with analog and digital comparator
Lower limit: Digital comparator (Comparison when time is up) |
| Setting range |
Upper limit: 0.01 to 15.00 mA
Lower limit: 0.01 to 15.00 mA / OFF |
| Judgment conditions |
Upper limit setting＞Leakage current＞Lower limit setting・・・GOOD
Upper limit setting≦Leakage current・・・・・・・・HIGH NG
Lower limit setting≧Leakage current・・・・・・・・LOW NG |