| General Specifications |
| Bar Graph Indicator (PBG8341A) |
| Construction |
Housing – nylon 6/6, window – acrylic, bezel/board supports – ABS, pins – phosphor bronze |
| Power supply |
11 – 30 Vdc |
| Signal input |
(By dipswitch configuration) Off – differential up to 5V
A – single signal (Ref. 0V) up to 5V
B – single signal (Ref. 1V) up to 6V |
| Cut out size |
45.6mm x 45.6mm |
| Fixing |
Push fit panel thickness 0.9mm to 3.2mm |
| Sealing |
Designed to IP50 standard.
(Front face may be silicon sealed after LED configuration) |
| Scale |
Supplied 0 to 100% in horizontal
Other scales, in volume, consult Parker Hannifin |
| Scaling factors |
10% to 100% range. Fully adjustable |
| Lamp intensity |
4mcd each |
| Front viewing |
Polarized |
| Weight |
29gms |
| MS150 Moisture Sensor |
| Pressure |
Maximum allowable operating pressure. (MAOP): 10bar (145 PSI) |
| Operating temperature |
| Maximum |
20°C (-4°F) |
| Flow through sesor cell |
Installed in active flowstream |
| Fluid compatibility |
Mineral oils and petroleum-based fluids |
| Viscosity Range |
Unlimited |
| Port Connection |
1/4" BSPT or 1/4" NPT/ |
| Connector Details |
M12x1 - 5 way |
| Supply Voltage |
+8 to +30Vdc |
| Sensor size/weight/material |
80mm x 43mm/0.1kg/aluminiumz |
| IP ratings |
IP68% (When mated with moulted connector1) |
| RH outputs |
(+1 to +5Vdc) or (4 to 20mA) |
| Temperature Outputs |
0 to +5 Vdc |