Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị đo tốc độ gió WS-03SD Custom

Mã sản phẩm: WS-03SD
Sử dụng cho Model:
Hãng SX: Custom
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

- It can ambient temperature measured by the temperature sensor in the wind speed measurement and wind speed sensor portion. Moreover, it is possible even when the temperature measured by thermocouple sensor of the type K and J type (sold separately).

- Wind speed, m / sec., When km /, ft / min, knots, miles / can be displayed at the time.

- Wind speed sensor is a hot wire type. This is useful for the measurement of micro-wind speed.

- Sensor probe section is useful to measure the altitude at the telescopic.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Wind speed


unit range

resolution

Measurement accuracy

m / s 0.20 ~ 5.00 m / s 0.01m / s ± (5% rdg + a) 
or 
± (1% fs + a) 
, whichever is greater *
5.1 ~ 25.0 m / s 0.1m / s
km / h 0.70 ~ 18.00km / h 0.01km / h
18.0 ~ 72.0km / h 0.1km / h


A = 0.1M * / S, 0.3Km / H 
FS = Full Scale (full-scale)


Temperature

type

Measurement range

resolution

Measurement accuracy

Wind speed sensor 0 ~ + 50 ℃ 0.1 ℃ ± 0.8 ℃
K type -50.0 ~ + 1300.0 ℃ 0.1 ℃ ± (0.4% rdg + 0.5 ℃)
-100.0 ~ -50.1 ℃ 0.1 ℃ ± (0.4% rdg + 1 ℃)
J type -50.0 ~ + 1100.0 ℃ 0.1 ℃ ± (0.4% rdg + 0.5 ℃)
-100.0 ~ -50.1 ℃ 0.1 ℃ ± (0.4% rdg + 1 ℃)


  • It does not include the option of sensor accuracy in the measurement accuracy.
  • There is no handling of the J-type thermocouple sensor at our company.


General specification


sensor

Wind speed sensor: hot wire

Temperature Sensor: glass bead type thermistor

Use temperature and humidity

0 ~ + 50 ℃, 85% RH or less (without condensation)

Storage temperature and humidity -20 ~ + 60 ℃, 85% RH or less (without condensation)
weight

Body: about 360g (including battery)

Power supply AA batteries × 6 or AC adapter (sold separately)
Size

Body: W68 x H180 x D45mm,

Telescopic type wind speed sensor: φ12 × 250 ~ 950mm, cable length about 1.2 ~ 1.9m

accessories Instruction manual, the sensor probe
Proofreading Improper
option

AC adapter: VSM-932EK

K-type thermocouple sensor: LK model number of the product

JAN 4983621270037


About SD card

  • It supports commercially available SD card (1 ~ 16GB), but the operation authentication for the SD card product of all manufacturers is not done. Because there may not be accustomed to the use by SD card, please note.
  • SD card is not included in the product. Please purchase separately.
  • SDXC type of memory card of the card and MMC Nadohoka can not be used.
  • SDXC, SDHC is a registered trademark of the SD Association.

Bình luận