Thiết bị đo và phân tích acquy PulseTech 390PT
TEST FOR BATTERY AND CHARGING SYSTEM PROBLEMS
An absolute necessity for your battery shop or maintenance bay, the 390PT uses patented single load, dynamic resistance technology to completely analyze your battery and charging system quickly, safely and accurately. You’ll provide better battery maintenance by locating the 6-Volt and 12-Volt vehicle batteries or 12-Volt and 24-Volt starting systems that require attention while still in the vehicle. Find battery issues before they become problems.
· Tests (VRLA, AGM, gel and flooded cell) – both 6-Volt and 12-Volt batteries
· Determines state of charge, cold cranking amps (CCAs) and good/bad battery
· Tests batteries IN or OUT of the vehicle
· Tests 12-Volt and 24-Volt charging systems for proper operation
· Tests discharged batteries down to 1.5-Volts
· Handy QUICKSTART instruction guide print on the back so you can’t lose it
· Displays battery voltage and battery capacity
· Rugged shock resistant rubber “boot” to protect your investment
· Selects from 6 languages: English, Spanish, French, German, Italian and Portuguese
· One-Year Limited Warranty
FAST AND EASY TO USE
1. Turn off ignition, all accessories and loads. Close all car doors and trunk.
2. Make sure battery terminals are clean. Attach black lead to negative battery terminal and red lead to positive battery
terminal.
3. Press up or down arrow indicators and press the side arrow enter key to select the battery test, battery type and battery
rating.
4. Battery test results will display one of the following: GOOD & PASS, GOOD & RECHARGE, RECHARGE & RETEST, BAD&
REPLACE or BAD CELL & REPLACE
5. Press up or down arrow indicators and side-arrow enter key to select system test.
6. System test results will display one of the following: CRANKING VOLTS NORMAL, CRANKING VOLTS LOW or CRANKING
VOLTS NOT DETECTED
7. Subsequent system tests show high, low and normal charging volts at idle and with accessories
For best results when using this battery tester, use female conversion connectors (part number 741X060) on a group 31 battery and male conversion connectors (part number 741X061) on a side-mount battery.