Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị hiệu chuẩn áp suất LR-Cal LPP 700 LR- CAL DRUCK & TEMPERATUR

Mã sản phẩm: LR-Cal LPP 700
Sử dụng cho Model:
Hãng SX: LR- CAL DRUCK & TEMPERATUR
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Thiết bị hiệu chuẩn áp suất
Model: LR-Cal LPP 700
Hãng: LR- CAL DRUCK & TEMPERATUR

Yêu Cầu Giá Tốt

Thông tin sản phẩm

- The pressure test pump LR-Cal  LPP 700 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

- If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal  LPP 700 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

- Despite its compact dimensions, the pressure test pump LR-Cal  LPP 700 is easy to operate and allows for exact generation of the required test pressures The LR-Cal  LPP 700 is fitted with a fine adjustment valve for a precise adjustment of pressures.

- The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

Thông số kỹ thuật

- Pressure generation: 0 to 700 bar = 0 to 10,152 psi
- Pressure ports (standard version):
   + For reference instrument (on the top of the pump): 1/2" BSP female (freely rotating), with integr. O-ring
   + For test item (at the test hose): 1/4" BSP female (freely rotating), with integr. O-ring
- This connection is made via an adapter, at the pump is a MINIMESS 1620 port.
- Materials: Aluminium, brass, ABS, Plexiglas, NBR
- Priming pressure: Hand lever
- High pressure: Switch-over knob, reduced lever stroke
- Pressure fine adjustment: Fine volume adjuster (with large volume)
- Operating media: Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
- Fluid reservoir: Volume > 200 cm³, can be filled during stroking
- Dimensions: approx. 270 x 160 x 120 mm (without test hose)
- Weight: approx. 1.3 kg (without test hose)
- Order-Code: LPP-700

Bình luận