| Technical parameters |
Value |
| Output |
Ethernet |
| Measured Value |
Temperature + Relative Humidity + Atmospheric Pressure |
| Construction Type |
With T+RH Probe on Cable |
| Design |
Industrial |
| Temperature Measuring |
Range -30 to 105 °C |
| Relay Output |
No |
| Two-State Input |
No |
| Lcd Display |
Yes |
| PoE |
No |
| Relative humidity range |
0 to 100% |
| Accuracy of relative humidity measurement |
±2.5% relative humidity from 5 to 95% at 23°C |
| Accuracy of temperature output |
±0.4°C |
| Maximum measuring atmospheric pressure range |
600 to 1100hPa |
| Accuracy of atmospheric pressure |
±1.3hPa at 23°C |
| Resolution |
0.1°C, 0.1%RH, 0.1hPa |
| Measuring interval |
2s |
| Available temperature units |
degrees Celsius, degrees Fahrenheit |
| Computed values |
dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy |
| Available atmospheric pressure units |
hPa, kPa, mBar, mmHg, inHg, inH2O, PSI, oz/in2 |
| Accuracy and range of dew point temperature output - for more details see graphs in manual |
±1.5°C at ambient temperature T<25°C and RH>30% range -60 to +80°C |
| Range of humidity sensor temperature compensation |
all temperature range |
| Temperature operating range of case with electronics |
-30 to +80°C |
| IP protection |
IP30 electronics, IP40 sensors |
| LAN connection |
RJ-45 connector, 10Base-T or 100Base-TX |
| Communication protocols |
WWW, ModbusTCP, SNMPv1, SOAP, XML |
| Alarm protocols |
E-mail, SNMP Trap, Syslog |
| Configuration |
T-Sensor, WWW configuration |
| Filtering ability of sensor cover |
0.025mm - filter with stainless steel mesh |
| Power |
9 to 30Vdc, maximum consumption 1W |
| Power connector |
co-axial, diameter 5.5 x 2.1mm |
| Length of the probe cable |
1m, 2m or 4m optionally |
| Dimensions |
display unit 88.5 x 93 x 39.5mm (W x H x D), probe length 88mm, probe diameter 18mm |
| Weight |
approximately 210g - 1m probe |
| Warranty |
3 years |