The ½” sq. drive is attached to the gear and enables attachment of sockets to operate nuts.
The angle of the wrench must be previously adjusted within a range of up to 140° in relation to the pole, through the two wing-nuts at the head.
The wrench head is made of cooper alloy and wrenches are made of a special heat treated steel. This versatile set is attached to the Ritzglas® pole, in order to guarantee necessary insulation.
WARNING
This tool has been mechanically rated only for adjustment of nuts, with max. torque of 2.0 daN.m (15 ft-lb). Tightening nuts, with proper torque, must be done with a flexible insulated wrench.
ALL-ANGLE COG WRENCH
| Cat. No. |
Description |
Dimensões |
Approx. Weight (lb) |
Ø
(in) |
Total Length (ft) |
Insulating
Length (ft) |
| RC403-0184 |
All-Angle Cog Wrench |
1.5" |
6.0 |
2.5 |
5.29 |
| RC403-0185 |
All-Angle Cog Wrench |
1.5" |
8.0 |
4.5 |
6.39 |
| RC403-0186 |
All-Angle Cog Wrench |
1.5" |
10.0 |
6.5 |
7.50 |