- Eastman’s static table system is capable of cutting, marking and punching virtually any flexible material at speeds of up to 60 inches per second (152.4 cm/sec.). The static cutting table has proven itself as the go-to resource for materials like cotton, nylon and vinyl as well as difficult-to-cut materials—such as polystrand, p-tex, and fiberglass-polyester blends. The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full-production runs. The system’s high-precision configuration features multi-axis motion for more defined and accurate cuts. Material is spread across the static table by an operator or with the use of a pneumatic gripper bar. The open plenum vacuum system design ensures evenly dispersed airflow for optimal material hold-down. This computer-controlled system features zoning capabilities to enable cutting in one area while the operator is simultaneously picking parts in another, maximizing daily production capacity.
+ Choice of standard, heavy-duty or fiber tool head, featuring individually aligned and calibrated tool spindles with your choice of over 60 blades, punches and notches.
+ A library feature within the operating control software allows the operator to save commonly used tool pressures and blade assignments based on job and material files.
+ Prevent unauthorized changes to the system and software with restricted login access.
Thông số kỹ thuật
- Width : 54 in. (1.37m) 60 in. (1.54m) 72 in. (1.82m) 78 in. (1.98 m) 96 in. (2.44 m) 108 in. (2.74 m) 114 in. (2.90 m) 126 in. (3.20 m) 156 in. (3.96 m)+ Please contact the factory for active cutting zone dimensions. Custom widths available, please contact the factory for more information.
- Length : 8 ft. (2.44m) 12 ft. (3.66m) 16 ft. (4.88m) 20 ft. (6.10m) 36 ft. (10.97m)+ Please contact the factory for active cutting zone dimensions. Custom lengths available, please contact the factory for more information.
- Drive System : Dual-X Axis, Y-Axis & Theta Axis. X & Y-Axis Rack & Pinion Drive, Brushless Servo Motors
- Electric - Control Power/PC : 230V, 3 ph, 50/60 Hz, 5.4 kVA. Stand-alone step-down/up transformer required for other voltages.
- Electric - Vacuum Blower : 208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional
- Power: Pneumatic : 75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm)
- Maximum Cutting Speed : 60 inches/second (152.4cm/second)
- Maximum Acceleration : 1.3g
- Maximum X/Y Speed : 60 inches/second
- Compressed Air Consumption : 15 CFM
- Sound Level : <76 db(A)
- Operating Temperature : 55 – 100°F (12 – 37°C)
- Humidity : 20 – 80% (non-condensing)
- Disclaimer : Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.