|
The "Canneed CBT-200 Buckle Tester Bottom for Cans" determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses.
The empty flanged can or straight wall can is placed in the holder. After covering the device with a plexiglass hood pressure is applied. The can is sealed with a rubber o-ring structure. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the can buckles. The maximum pressure value is shown in the display.
Any can of various diameters and heights may be tested: inserts are available that can be exchanged within seconds.
Features:
1) Easy and convenient to put in and take out the sample! There is no need to press or pull
2) Measuring empty necked-in cans or straight wall can at the same time without changing the clamp.
3) Standard equipment in can making industry
4) RS232C data output, able to transfer the data to SPC system
5) Touch-screen PLC Controlled System, data collected automatically
6) Pressing speed is adjustable and the pressure curve can be set
7) With in-set pneumatic supercharger valve, can increase the pneumatic supply pressure to 1-2 times as large as the input pressure
8) High accuracy
9) Test Point for Calibration
10) Display the max. and min. measuring value and average after several tests
11) Multi- safety design
12) Mechanical Overload Protection
|