The JUMO dTRANS p02 CERAMIC pressure transmitter measures the pressure (relative and absolute pressure) of non-aggressive and aggressive gases, vapors, and liquids.
The pressure transmitter's ceramic measuring system works according to the capacitive measuring principle. The output signal is a load-independent direct current, which is proportional to the input pressure.
The JUMO dTRANS p02 CERAMIC pressure transmitter can also be operated with a HART communicator, or with a PC that is connected to a HART modem and by using the Windows compatible PC setup program.
For relative pressure, absolute pressure, and filling level
Impervious to aggressive and abrasive gases, vapors, and liquids
Temperature of medium: -40 to +120 °C
Linearity: ≤ 0.1 % of end value
Excellent long-term stability of < 0.1 % per year
Excellent temperature compensation
Measuring ranges: -100 to +100 mbar up to -1 to +25 bar relative, 0 to 600 mbar to 0 to 25 bar absolute
Operation on site or using HART protocol
Signaling if the measuring range is exceeded or not met and in the event of sensor exceedance and sensor faults
specification: simple, time-saving, convenient
Attenuation
Current generator function
Output signal in event of fault: adjustable to 3.85 mA or 21.5 mA
Lock function for keys
Zero point correction
Start and end of measuring without pressure specification (blind setting) or with pressure Reset function for minimum and maximum measured values (drag indicator)
Density correction for various measuring media
Measuring units for pressure and temperature
>>> Cảm biến đo áp suất JUMO dTRANS p33 giá rẻ