| Comet T3611 Specifications |
| Technical Parameters |
Value |
| Output |
Ethernet |
| Measured Value |
Temperature + Relative Humidity |
| Construction Type |
With T+RH Probe on Cable |
| Design |
Industrial |
| Temperature Measuring Range |
-30 to 105 °C |
| Relay Output |
No |
| Two-State Input |
No |
| Lcd Display |
Yes |
| PoE |
Yes |
| Relative humidity range |
0 to 100% |
| Accuracy of relative humidity measurement |
±2.5% relative humidity from 5 to 95% at 23°C |
| Accuracy of temperature output |
±0.4°C |
| Resolution |
0.1°C, 0.1%RH |
| Measuring interval |
2s |
| Available temperature units |
degrees Celsius, degrees Fahrenheit |
| Computed values |
dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy |
| Accuracy and range of dew point temperature output - for more details see graphs in manual |
±1.5°C at ambient temperature lower than 25°C and RH>30%
range -60 to +80°C |
| Temperature compensation of the humidity sensor |
all temperature range |
| Temperature operating range |
-20 to +60°C |
| IP protection |
IP30 electronics, IP40 sensors |
| LAN connection |
RJ-45 connector, 10Base-T or 100Base-TX |
| Communication protocols |
WWW, ModbusTCP, SNMPv1, SOAP, XML |
| Alarm protocols |
E-mail, SNMP Trap, Syslog |
| Configuration |
T-Sensor, WWW configuration |
| Filtering ability of sensor cover |
0.025mm - filter with stainless steel mesh |
| Power |
Power over Ethernet according to IEEE 802.3af or 5Vdc |
| Power connector |
co-axial, diameter 5.5 x 2.1mm |
| Length of the probe cable |
1m, 2m or 4m optionally |
| Dimensions |
136 x 159 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm |
| Weight |
approximately 380g |
| Warranty |
3 years |