This Thermocouple/RTD scanner is perfect for any multi-point temperature measurement application. The bright red LED display is easy to read, even at a distance. Splash-resistant front panel keypad is easy to clean & wipe down. The meter has 2 user-selectable HI/LO, HI/HI, or LO/LO alarm set points, configured through the front panel push buttons. During an alarm condition a front panel LED annunciator is enabled & an internal 2 Amp relay contact output is engaged. The meter display will cycle through all input channels at a user determined rate of 0.5~10 seconds. 24 VDC powered. A must have for multi-point temperature monitoring in the Lab, control room, or Dynamometer.
Specifications
Thermocouple Input Types: K, T, J, B, E, N, R, S (user selectable)
RTD Input Types: PT100, CU100, CU50 (user selectable)
Resolution: RTD (0.1° Res): -167.9 to +999.9°F (-189.9 to +596.9°C) TC (0.1° Res): -167.9 to +999.9°F (-199.9 to +999.9°C) TC (1° Res): -412 to 3271°F (-257 to 1800°C)
Display: 4-digit LED, 0.56 inch (14 mm high)
Sample Rate: 0.1 second per channel
Power: 20 to 28 VDC @ 400 mA (nominal)
Dimensions: 6.3 inch x 3 inch x 7 inch (160 mm x 80 mm x 182 mm) (Cutout: 6 inch x 3 inch (152 mm x 76 mm))
Weight: 2 pounds (900 grams)
Relay contact: 250 VAC @ 2 amps (resistance load)
Environment: 0 to 50°C, 90% Max. RH (non-condensing)