Flexible Solution
The MAGNETOMAT® 1.782 is a measuring system for the precision detection of magnetic flux density and relative permeability. The MAGNETOMAT software is used for displaying the measured values and saving and exporting data. The wide range of probes facilitates optimal adjustment to the conditions of the application, such as the measurement of relative permeability within the scope of the quality control of stainless steel and low-permeable (non-magnetic) alloys. Further applications include the long-term monitoring of the magnetic environment, e.g. prior to installing magnetically sensitive devices, and the localization of ferrite enclosures in stainless steel and NE materials. Changes in material (sulfidation, degradation of lamination, structural changes) can also be proven thanks to permeability comparative measurements.
PC-controlled fluxgate magnetometer
Measure magnetic flux density absolute or gradient
Probe for measurement of relative permeability µr in accordance with IEC 60404-15 andASTM A342M
Multi-channel probe arrangements
Single value or continuous measurement
Trigger interface
Data acquisition and post processing software
Data base concept and data transfer interface
Technical Data
| Measurement range: |
0.1 nT to 1 mT
µr 1.0 to 2.0 |
| Uncertainty of field measurement: |
1.5 % of the measurement range |
| Uncertainty of permeability maesurement: |
5 % of the measured value |
| Resolution: |
24 Bit ADC |
| Noise: |
≤ 20 to 500 pT/√Hz@1Hz
(depending on probe type) |
| Power supply: |
+10 to +28 VDC |
| PC port: |
RS232 |
| Dimensions, electronics: |
130 x 187 x 100 mm (L x W x H) |
| Weight, electronics: |
0.5 kg |
| Temperature range: |
-25 °C to +50 °C |
|