- Manta G-1236 is a 12.4 Megapixel machine vision camera with a GigE compliant Gigabit Ethernet interface and Hirose port. Manta G-1236 incorporates the high quality Type 1.1 (17.6 mm diagonal) Sony IMX304 CMOS sensor with Pregius global shutter technology. At full resolution, this camera runs 9.7 frames per second. With a smaller region of interest, higher frame rates are possible. The Manta G-1236 is an ideal replacement for legacy CCD models.
- Manta is one of Allied Vision's versatile GigE Vision cameras with a wide range of features. Particular highlights are the three look-up tables, sophisticated color correction capabilities, a robust metal housing, and many modular options. By default monochrome models ship with protection glass B 270 (ASG) and color models ship with an IRC Hoya C-5000 IR cut filter.
- Monochrome (G-1236B) and color (G-1236C) models
- GigE Vision interface with Power over Ethernet option
- Screw mount RJ45 Ethernet connector for industrial environments
- Supports cable lengths up to 100 meters (CAT-5e or CAT-6)
- Trigger over Ethernet (ToE) Action Commands allow for a single cable solution
- Standard M3 mounting holes on top and bottom of housing
- Support for popular third party image-processing libraries including Cognex VisionPro, MathWorks MATLAB, and National Instruments LabVIEW
- Image optimization features:
+ Auto gain (manual gain control: 0 to 40 dB; 0.1 dB increments)
+ Auto exposure (exposure time control varies by pixel format)
+ Auto white balance (G-1236C only)
+ Binning
+ Black level (offset)
+ Color correction, hue, saturation (G-1236C only)
+ Decimation
+ Gamma correction
+ Three look-up tables (LUTs)
+ Region of interest (ROI), separate ROI for auto features
+ Reverse X/Y
- Camera control features:
+ Auto-iris (video type)
+ Event channel
+ Image chunk data
+ IEEE 1588 Precision Time Protocol
+ Storable user sets
+ StreamBytesPerSecond (bandwidth control)
+ Stream hold
+ Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
+ Temperature monitoring (main board)
+ Trigger over Ethernet (ToE) Action Commands