- Horizontal isotropic ultra broad bandwidth antenna UBB27_G3 from 27 MHz up to beyond 3.3 GHz (limited by the frequency response of the HF59B).
- 800 MHz high pass filter HP800_G3 for the suppression of low frequencies when measuring with the log.-per. antenna of the HF59B.
- High frequency preamplifier HV10_27G3. Increases the measurement range by 10 dB (by a factor of 10) - important when wanting to reduce the increased noise background in the radar or UMTS/3G-mode.
- Attenuator DG20_G3: Increases the maximum measurable value by 20 dB (or by a factor of 100) to 1,999 mW/m² (= 1.999 W/m²).
- Plastic case K2 with shaped foam filler for a safe transportation of all components. Offers enough space for yet another Gigahertz Solutions measuring device (high frequency or low frequency).
- Frequency range: 27 MHz - above 3.3 GHz
- Measurement range: Power flux density: 0.001 - 1,999,000 µW/m² (i.e. 1 nanoW/m² nominal display resolution to 1.999 W/m² when applying the amplifier and attenuator enclosed)
- Precision:
+ Basic accuracy (CW) including linearity tolerance: +/- 3 dB
+ Zero offset and rollover +/- 5 digits
- Sensor: 2 antennas:
+ Optimised logarithmic periodic antenna with frequeny compensation directly on the antenna: Less ripple, better directionality, improved shielding vs. ground, continuous LED-monitoring of quality of connections
+ Quasi-isotropic ultrabroadband antenna ("omni"-characteristic) aligned for vertically polarised fields
- Audio analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control radar) by means of an acoustic signal proportional to the modulation frequency
- Signal rating:
+ Display of peak value, peak hold as well as average value (switchable)
+ Quantitative differentiation between pulsed and un-pulsed radiation (patented control)
- Signal output ports: A calibrated extra AC-measurement output for the demodulated signal, and a scalable DC-output
- Power supply:
+ Rechargeable highpower 9.6 Volt NiMH battery pack inside the meter
+ Average operation time: 7 - 8 hours
+ Low-Batt. indication
+ Auto-power-off (can be deactivated for longterm measurements)
+ AC-adaptor for charging and longterm operation included