- The ICL-2100 is a dual-channel opto sensor with two manual and four automatic operating modes. This device replaces two single-channel opto sensors with the advantage of no mutual interaction between each single channel.
- The automatic operating mode provides a secure functionality that adjusts to external interferences, deterioration and misalignment of the sensors. The device has semiconductor outputs.
- The device settings can be changed with the related software only. It is possible to program eight different basic settings which can be selected via DIP switch.
- An integrated test button is used for determining sensor alignment and also reporting wire breakage. The alarm output displays if the sensors are too polluted.
- The Master/Slave operation provides the possibility to synchronize two of the following amplifiers: ICL-2100, ICL-6100 and ICL-8100. That means that a system of two combined amplifiers works with 2, 4, 6, 8, 10, 12, 14 or even 16 totally independent channels.
- Using the test input via an external connection, an automatic function test can be activated. The analog output may also be used for the alignment of the sensors.
- One LED scale shows the switching status for each channel while another shows that the signal strength is sufficient. An alarm LED and alarm output acts as a contamination indicator and sensor breakdown signal. All connections use quick-connect plugs.
- 2-channel opto sensor
- Automatic transmit power adjustment that compensates for external interferences, deterioration and misalignment
- Permanent sensor-control
- Push button with diagnostic
- Analog output 0-10 V for testing purposes
- Master/Slave operation
- PNP switching output for each channel, 100 mA short-circuit proof
- Transmitter and receiver connections are short-circuit proof
- Serial RS232-Interface for connection to a PC
- Connections are pluggable
- Mounting for DIN rail
Thông số kỹ thuật
- Number of channels : 2
- Multiplex-speed : 10 ms
- Range (using transmitter ITL combined with receiver IRH) : 12 m (39 ft)
- Range (using transmitter ITH combined with receiver IRH) : 19 m (62 ft)
- Range (using transmitter ITA combined with receiver IRH) : 35 m (115 ft)
- Operating modes : 2 manual / 4 automatic
- Transmit frequency : 4 kHz
- Switching outputs : 24 V DC, 100 mA short-circuit proof
- Response time : 12 ms
- Alarm output : 24 V DC, 100 mA short-circuit proof
- Analog output : 0...10 V
- Test input : 24 V DC
- Interface : RS232
- Supply voltage : 24 V DC ± 20%