Microscopes IMCTL 150x75 are manufactured according to the specifications of AL2.787.140TU and are designed to measure:
- in the transmitted and reflected light of outer linear dimensions and shaft diameters up to 150 mm. in the longitudinal direction and up to 75 mm. in the transverse direction;
- angles of products up to 360 ° on the angle head and round table;
- cutters, cutters, cams and other tools, as well as templates of any configuration, the dimensions of which allow them to be installed on the microscope measuring table.
The measurement can be carried out in rectangular and polar coordinates:
- threads of taps along the diameter, pitch and angle of the profile;
- threaded gauges by step, profile angle, profile straightness and inner diameter;
- cone gauges, cylindrical and conical bushings, radius profiles;
- distances between the centers of the holes.
The microscope is designed to operate under the following conditions:
- ambient air temperature (20 + 3) ° С;
- the rate of change of temperature in the working space during the measurement of not more than 0.5 ° C for 1 hour;
- the relative humidity of the ambient air is 80%;
- voltage of the supply network (220 +22 / -33) V;
- frequency of the supply network (50 +/- 1) Hz;