- The Pantron ISG-A124 is a single channel opto sensor with advanced features. The automatic operating mode is useful for adjusting to contamination, misalignment and other disturbing influences.
- At the push of a button, the device shows information about sensor alignment and wiring, such as wire breakage and short-circuits. The dual-frequency change-over is useful to decouple nearby light barriers. Four level settings allow an adjustment to different operating conditions. By use of dark switching, it is possible to reverse the switching behavior of the output. By the use of the test input via an external testing facility, an automatic function test can be realised.
- The alarm output indicates that the sensors are too contaminated. Includes a relay output for high switching loads.
- Single channel opto sensor
- Detection range up to 50 m (164 ft)
- Automatic transmit power adjustment
Test function
- Relay output
- Alarm output
- Test input for system check
- 4 level settings
- 2 frequency settings
- Light/dark switching
Thông số kỹ thuật
- Number of channels : 1
- Range (using transmitter ITL combined with receiver IRL / IRH) : 7 m / 15 m (23 ft / 49 ft)
- Range (using transmitter ITH combined with receiver IRL / IRH) : 10 m / 25 m (33 ft / 82 ft)
- Range (using transmitter ITA combined with receiver IRL / IRH) : 20 m / 50 m (66 ft / 164 ft)
- Switching frequency : 20 Hz
- Power consumption : 5 VA
- Switching output : Relay 5 A, 230 V AC
- Alarm output, DC-supply : PNP / NPN 100 mA, 30 V DC
- Alarm output, AC-supply : PNP 5 mA
- Test input : 24 V DC
- Connection : 11-pin DIN-plug
- Supply voltage : 230 V AC / 115 V AC / 24 V AC / 24 V DC