Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Jitter Meter MWJ-6393 BD Keisoku

Mã sản phẩm: MWJ-6393 BD
Sử dụng cho Model:
Hãng SX: Keisoku
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
This MWJ-6393, Bul-Ray Disc Jitter Meter is designer for measuring and indicating the jitter conponents of the data signals (1-7 modulation signals) from Bui-ray Discdrives employed as input signals and the clock signal extracted by the internal PLL circuit employed as a reference signal.

Yêu Cầu Giá Tốt

Thông tin sản phẩm

FEATURES

Conventional equalizer provided as standard
The conventional equalizer conforming to Blu-ray Disc standards is provided and the boost level can be adjustable. The measurements of the media with 23.3GB, 25.0GB and 27.0GB are possible by the setting value.
Offset-scale meter (3% to 13%)
To adopt an Offset-scale meter, the efficient measurement can be done in one range.
Jitter value indicated with %
The unit converts a time difference between a data signal and the clock into a sigma value and indicates its jitter quantity as the percentage to the clock cycle on the meter.
The polarity of the measurement
It can select either + or - edge of the data signal, and also select +, - or +/- edge for jitter measurement.
INHIBIT function
The inhibit function is provided to inhibit jitter measurement of faulty section.
GO/NO judgment
A GO/NO result is indicated in relation to a preset jitter value.
Auto frequency compensation circuit
Since an automatic frequency compensation circuit is provided, the jitter value can be read by a percent value accurately even if the clock frequency changes.
2T Rejection function
It can measure jitter values without 2T signal requested by Dual layer Disc measurement.
Panel-lock function
The panel-lock function is provided to preserve the measurement setting conditions.
Remote control function
The DATA EDGE, RANGE, LIMIT EQ. & 2T REJ. function on the front panel can be remote-controlled by control signals.
Limit equalizer as option
The limit equalizer is available as option.

SPECIFICATIONS

 Input section
Input Signal

1-7 modulation signals with 64MHz to 68MHz as reference clock frequency.

Clock Frequency 66MHz
Clock Frequency Range 64MHz to 68MHz
Input Level Range 0.1Vp-p to 1.0Vp-p
Input Impedance 50Ω, unbalance
INHIBIT Input Signal TTL level
MAX. Input Level ±10VDC or less, 3.5Vrms or less

 Measuring section
Jitter Measuring Range ±0.5T to the clock edge
Reference Clock Internal PLL clock
Measuring Data Edge +, - or +/- (selectable)
Equalizer Conventional, Limit Equalizer
• Frequency Characteristion Conforms to Blu-ray Disc Standards(Part.1 Ver.1.0)
• Standard Setting +5.8dB±0.3dB (16.5MHz - 200kHz @66MHz)
• Variable Range 0dB, 2.3, 2.6, 2.8, 3.0, 3.3, 3.6 to 9.0dB
0.2dB step from 3.6 to 90dB
• Group Dley Characteristion Max. 2ns (3MHz to 16.5MHz)

 Indication Section
Indicating System Percent(%) Indication by the meter and LCD display in SIGMA mode
• Range 13% and 20%
Measuring accuracy
• Meter Display

13% : ±0.5(%) of the indication (3% to 13%)
20% : ±1.0(%) of the indication

• Digital Display Less ±(3% of reading + 20 digits)
Indicating Method Percent indication by an analog meter and LCD
LCD Digital Display
• Indication Resolution 0.01
• Renewal cycle Approx. 1 cycle per second
Judgement Indication Preset value and measured value are compared and the judgement result is indicated by LED.

 Output / Input Section
RECORDER 0.1V/% ±50mV (open circuit)
600Ω±10%
REMOTE ALL functions on the panel except PRESET are externally controllable
INHIBIT
• Input Level TTL level
• Logic

Active LOW (Logic selection is availabl)


 Factory Option
EQUALIZER

Limit Equalizer Conforms to Blu-ray Disc Standards
( Part.1, Ver.1.0)

• EQUALIZER Output 0.5Vp-p at 50Ω load
JITTER Output 10% at 0.1Vrms at 50Ω load
DATA Output 0.25Vp-p at 50Ω load
CLOCK Output 0.25Vp-p at 50Ω load

 Others
Operating Temperature Range    0ºC to +40ºC
Guarantee Temperature Range +15ºC to +35ºC
Power requirements AC100 /120-220/240V, 50 / 60Hz 15VA
Dimentions 240(W)×154(H)×130(D)mm
Weight Approx. 2.0kg

* Specifications are subject to change without notice.

Bình luận