Máy đo biên dạng
Model : MarSurf XC 20
Hãng sản xuất : Mahr
The MarSurf XC 20 is recognized as the ultimate in contour evaluation. What started some 30 years ago with the Konturograph - consisting of a drive unit and X-/Y-recorders #96 has developed into a top-quality contour measuring system using cutting-edge technology. The finely tuned device configuration offers superb performance standards. The drive unit and the measuring stand are controlled and positioned via the reliable measuring and evaluation software.
- User prompts can be displayed
- Interactive control elements support evaluations and automatic routines
- Measurement of upper and lower contours with a twin-stylus probe; a relative evaluation of the two contours is also possible
- Profile section images, with evaluation of different parameters for each section
- Segmented measurement is possible across obstacles such as bores or steep sides
- Import and export of dxf files supported for setpoint/actual value comparison
- PCV 200 drive unit with patented probe arm fixing for reproducible probe arm change without tools
- Patented probe system for measuring station flexibility
- Manually variable tracing forces also support flexibility
- Synthetic creation of nominal profiles from straight lines and circle arcs
- Easy comparison of nominal and actual profiles Different tolerances can be selected by description within a profile
- Technical data
- Applications
- Versions
- Shipment
|
Resolution
|
In Z, relative to stylus tip: 0.38 µm (350 mm probe arm) / 0.19 µm (175 mm probe arm)
In Z, relative to measuring system: 0.04 µm
|
|
Sampling angle
|
on smooth surfaces, depending on deflection: trailing edges up to 88°, leading edges up to 77°
|
|
Start of traversing length (in X)
|
0.2 mm
|
|
Tip radius
|
25 µm
|
|
Contacting speed (in Z)
|
0.1 to 1 mm/s
|
|
Probe arm length
|
175 mm, 350 mm
|
|
End of traversing length (in X)
|
200 mm
|
|
Positioning speed
|
In X and return speed: 0.2 to 8 mm/s
In Z: 0.2 to 10 mm/s
|
|
Guide deviation
|
< 1 µm (over 200 mm)
|
|
Measuring speed
|
0.2 mm/s to 4 mm/s
|
|
Measuring range mm
|
(in Z) 50 mm
|
|
Traversing lengths
|
0.2 mm to 200 mm
|
|
Measuring force (N)
|
1 mN to 120 mN, below and above (can be set in MarSurf XC 20)
|
|