Băng thông : 100Mhz
Số kênh : 4
Tốc độ lấy mẫu : 1Gsa/s
Độ dài sóng : 25k
Độ phân giải : 8 bit
Rise time : <3.5ns
Độ nhạy điện áp : 2mV ~ 5V/div
Độ nhạy thời gian : 1ns ~ 10s/div
Độ chính xác : ±(3% x |Readout|+0.05 div x Volts/div+0.8mV
Input Coupling : AC, DC & GND
Trở kháng vào : 1MΩ±2%, ~16pF
Đầu vào lớn nhất : 300V (DC+AC peak), CATII
Tính toán sóng : + , - ,* , FFT ,FFTrms
Nguồn Trigger : CH1 , CH2 , CH3 , CH4 , Line
Đo 27 giá trị đo về điện áp và thời gian
Màn hình hiện thị : 5.7 inch, 234x320, 8x10/12 ô.
Giao tiếp : USB, RS232 và GPIB (Option)
Kích thước : 310x142x254mm, 4.3kg
Nguồn cung cấp : AC 100V ~ 240V , 48Hz ~ 63Hz
Phụ kiện kèm theo : Máy chính, Que đo GTP- 100A-4 (4 cái), Cáp, HDSD, dây nguồn
| |
GBS-1074 |
GBS-1104 |
GBS-1204 |
| VERTICAL |
| Channels |
4 |
4 |
4 |
| Bandwidth |
DC ~ 70MHz (-3dB) |
DC ~ 100MHz (-3dB)
|
DC ~ 200MHz (-3dB) |
| Rise Time |
5 ns Approx. |
3.5ns Approx. |
1.75ns Approx. |
| Sensitivity |
2mV/div ~ 5V/div (1-2-5 increments) |
| Accuracy |
±(3% x |Readout|+0.05 div x Volts/div+0.8mV) |
| Input Coupling |
AC, DC & Ground |
| Input Impedance |
1MΩ±2%, ~16pF |
| Polarity |
Normal & Invert |
| Maximum Input |
300V (DC+AC peak), CATII |
| Waveform Signal Process |
+ , - ,* , FFT ,FFTrms |
| Offset Range |
2mV/div ~ 20mV/div : ±0.5V |
| 50mV/div ~ 200mV/div : ±5V |
| 500mV/div ~ 2V/div : ±50V |
| 5V/div : ±300V |
| Bandwidth Limit |
20MHz (-3dB) |
| TRIGGER |
| Sources |
CH1 , CH2 , CH3 , CH4 , Line |
| Type |
Edge ,Video ,Pulse |
| Modes |
Auto-Level, Auto, Normal, Single |
| Video trigger standard |
SECAM ,PAL ,NTSC |
| Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV |
| 25MHz ~70/100/ 200MHz : Approx. 1div or 10mV |
| HORIZONTAL |
| Range |
1ns/div ~ 10s/div (1-2-5 increments) |
| ROLL : 250ms/div ~ 10s/div |
| Modes |
Main, Window, Window Zoom, Roll, Scan, X-Y |
| Accuracy |
±0.01% |
| Pre-Trigger |
20 div maximum |
| Post-Trigger |
1000 div |
| X-Y MODE |
| X-Axis Input |
Channel 1 |
| Y-Axis Input |
Channel 2 ,Channel3 ,Channel 4 |
| Phase Shift |
±3° at 100kHz |
| SIGNAL ACQUISITION |
| Real-Time Sample Rate |
1GSa/s maximum |
| Equivalent Sample Rate |
25GSa/s maximum |
| Vertical Resolution |
8 Bits |
| Record Length |
25K Points maximum |
| Acquisition Mode |
Normal, Peak Detect, Average |
| Peak Detection |
10ns |
| Average |
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
| CURSORS AND MEASUREMENT |
| Voltage Measurement |
Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot |
| Time Measurement |
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
| Delay Measurement |
Eight types of delay measurement |
| Cursors Measurement |
Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) |
| Auto Counter |
Resolution : 6 digits |
| Accuracy : ±2% |
| Signal Source: All available trigger source except the Video trigger mode |
| CONTROL PANEL FUNCTION |
| Autoset |
Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
| Save Setup |
Up to 20 sets of measurement conditions |
| Save Waveform |
24 sets of waveform |
| DISPLAY |
| TFT LCD Type |
5.7 inch |
| Display Resolution |
234 (Vertically) x 320 (Horizontally) Dots |
| Display Graticule |
8 x 10 divisions ; 8 x 12 divisions (menu off) |
| Display Brightness |
Adjustable |
| INTERFACE |
| Go/NoGo Output |
5V Maximum/10mA TTL Open Collector Output |
| RS-232 Interface |
DB 9-pin male DTE RS-232 interface |
| GPIB Interface (Option) |
Fully programmable with IEEE 488.2 compliance |
| USB |
USB Host/Device 2.0 full speed supported |
| POWER SOURCE |
| Line Voltage Range |
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
| |
|
| MISCELLANEOUS |
| Multi-Language Menu |
Available |
| Online Help |
Available |
| Data Log |
Available |
| Time Clock |
Time and Date, Provide the Date/Time for saved data |
| DIMENSIONS & WEIGHT |
| |
310(W) x 142(H) x 254(D) mm; Approx. 4.3kg |
|