- Programmable stripping machine for semi-rigid coaxial cables up to 4.50 mm (0.177”) outer diameter and strip lengths up to 30 mm (1.18”).
- High precision and well-proven mechanics compared to the previous model SemiRigid 1000
- User friendly high resolution 7” color touchscreen
- Intuitive and easy programming thanks to the excellent menu navigation and predefined cable ends
- Many useful wizards for machine setup and maintenance
- Appealing design and ergonomics
Thông số kỹ thuật
- Cable Diameter : Max. 4.50 mm (0.177“) ; Min. 0.86 mm (0.034“)
- Stripping Length : Max. 30 mm (1.18“)
- Increments :
+ Length: 0.01 mm (0.00039“) steps
+ Diameter: 0.01 mm (0.00039“) steps
- Stripping Blades :
+ For turning and removing: 2 pcs.
+ For turning: 2 pcs. (1 each)
+ For pointing: 1 set (4 pcs.)
- Cycle Rate : > 3 s, (depending upon cable type and programming)
- Program Capacity : 1‘000 cables
- Interfaces : 2x USB "Host", Footpedal, Ethernet (on request)
- Noise Level : < 70 db (A)
- Power Supply : 100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz
- Air Pressure : 6 bar / 0.6 MPa / 87 psi
- Air Consumption per Cycle : 7-30 l at 6 bar (87 psi), (depending upon cable type and programming)
- Dimensions (L x W x H) : 566 x 215 x 252 mm (22.3 x 8.5 x 9.9“)
- Weight : Net 19.5 kg (43 lbs)
- CE – Conformity : The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
- Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.