the Custom Ringmarker Ring marking system for marking hot telephone and hookup wire insulation with colored rings. The RS 70 has been designed for use immediately after the extruder, at medium production speeds up to 1200 m/min. Four versions cover a wide range of applications.

Common Features

Rugged, virtually maintenancefree AC drive. Marking drums run absolutely vibration-free, with no control variations. Ink paths contain no rotating gaskets. Height-adjustable marking system can be easily engaged and disengaged without interfering with the extrusion process. Ring marking by a pair of rotating drums with high-precision ink nozzles. Interchangeable marking drums for easy changing of ring patterns. Marking drums for standard and custom ring patterns available. Automatically synchronised with the wire speed by means of a 0-10 V DC signal output from the extrusion line control No rotating gaskets in the marking assembly. Simple installation with no changes to the extrusion line required. Maximum marking speed does not depend on ring spacing. Dedicated replaceable drawertype ink tanks allow quick color change. Available with gear pump or diaphragm pump (for water based inks). Two-stage ink filter system prevents clogging of ink nozzles. Built-in ink cooler. Ink viscosity can be measured and adjusted during operation. Requires extremely little space between extruder and take-up. Automatically synchronized flashing stroboscope for monitoring ring quality and setting up marking parameters.