50 kinds of pin cut data are memorized by backup RAM, and when required, it can call at any time.
Since the input of an unnecessary pin and a constant 寸 cut is performed looking at the pin which appears in LCD (liquid-crystal-display screen), it is clear.
The plan substitute to other pitches can also be performed only by exchange of a sprocket and the Cush tooth in a short time.
A function is upgraded sharply. Speed also became quick 50%.
（Our comparison）
Automation of production is also possible by connecting with leadframe soldering equipment and ADL-780.
| Substrate supply |
Manual operation |
| Application board |
3-40 mm in width, and 10-80 mm in length
Double-sided mounting board correspondence (1 mm or more of substrate both-ends space) |
| Application leadframe |
12 to 22 mm full length A specification pitch is one sort (2.54, 2.5, 2.0, 1.8, etc.).
Change (a sprocket, the Cush tooth) in other pitches serves as an option. |
| The number of fitting pins |
A maximum of 40 pin |
| Frame sending |
Pulse motor drive |
| standard size cut |
Good [ to one to 99 sheets ] by standard equipment and data setup |
| Baton |
About 1.5 seconds (in the case of 2.54 pitches and 20 pins)/sheet |
| Memory function |
50 kinds |
| Power supply |
AC100V, 300 VA or less |
| Air source |
5kg／cm2 |
| Outside dimension |
L770×W490×H360mm（A reel is excluded.） |
| Weight |
40kg
|
|