The 7006 is a single function low-cost pocket sized simulator, designed for test and calibration of process loops. Simplicity of operation is the key feature - no keypads or complicated selections. Engineers will be able to pick up the 7006 and get to work immediately. Just select 4 - 20mA or 10V loop, and TxSim, RxTest, or 0 to 10V DC simulation mode. Internal loop drive supply for powering the loop is also available if required.
As a loop simulator it acts as a source to provide the loop signals, 4 - 20mA or 0 - 10V. No complicated selection of the output, just operate up/down buttons to increase or decrease the signal. There are 7 set-points, 0%, 10%, 25%, 50%, 75%, 90%, 100%. Each is indicated on a high brightness LED and an audible beep sounds as you step between them. Auto-stepping mode (adjustable rate) allows the 7006 to be left connected stepping up and down.
For loop signal checking Time Electronics offer the 7007 Loop-Mate as an accompanying instrument. An engineer can then move to another location to check that the signal is arriving correctly and is within specification. The 7007 is a dedicated loop signal indicator, just as easy to operate. Once again select the loop type, 4 - 20mA, or 0 - 10V, and whether you want the display in direct units, or % of span. The LCD display shows the signal to an accuracy of 0.05% either in mA, V, or % of span.
Both units are powered by a single standard PP3 battery that gives up to 40 hours continuous use.
| Range |
4 - 20mA or 0 - 10V |
| Set-Points |
0, 10, 25, 50, 75, 90, 100% of span |
| Accuracy |
0.1% |
|
Modes
|
TxSim or RxTest
|
| Loop Supply |
Internal, 25mA max |
| Auto-Step |
Up/Down/Up, 0.5, 1, 2, 4, or 8sec/step |
| Range |
4 - 20mA, 0 - 10V, 0 - 50V |
| Display |
LCD 4 digits, mA, V, or % of span |
| Accuracy |
0.05% |
| Modes |
RxSim, TxTest, or 50mA/50V measure |
| Loop supply |
Internal, 25mA max |
| Power |
PP3 battery, typical life 40 hours |
| Dimensions |
H140 x W65 x D30mm |
| Weight |
7006 = 180g. 7007 = 200g |
| Supplied With |
Carry Case and user manual |
| Optional Extras |
Calibration certificates traceable to NPL and UKAS |
| Country of Origin |
UK |
|