- The RF51A is an OEM laser module to integrate laser distance measurement capabilities into existing measurement equipment. It consists of the laser measuring module and an interface board. - Compared to the industrial laser distance measurement gauge LDM51, the housing and the control elements are omitted.
- The OEM laser module RF51A measures contactless the distance between itself and nearly every surface and material. Up to a distance of 100 m no additional reflectors are required for measuring. The maximum distance exceeds the range of 200 m. Due to the high measuring frequency of 100 Hz also fast movements of the target can be captured.
- The OEM laser module RF51A operates with a modulated visible laser with low beam divergence. Newly developed algorithms and most modern technologies of the opto-electronic signal processing allow a save, highly precise and fast distance measurements that can be applied in almost all areas of machinery and plant engineering.
- Other application examples are level measurement, detection of geometric dimensions like length, width or thickness and position measurement.
- While developing the OEM laser module RF51A there was paid particular attention to the operation in outdoor areas with high influence of constant light by solar radiation and high temperatures.
Thông số kỹ thuật
- General measurement range : 0.15 m ... 200 m
- Accuracy, absolute (1 σ) : ≤ ± 3.9 mm
- Repeatability, max. (standard deviation) : ± 0.6 mm
- Resolution : 0.1 mm
- Measurement period, min. : 10 ms
- Laser class : Laser class 2, EN 60825-1:2014
- Laser Wavelength : 655 nm
- Laser beam divergence : < 0.2 mrad
- Interfaces : RS232, RS422, RS485 (selectable); Optional: Profibus DP-V0 Slave, 12 MBaud, IEC 61158 / IEC 61784; Optional: SSI (50 kHz ... 1 MHz)
- Digital switching output lines : 3 x High-Side-Switch, max. 0.2 A
- Analog Interface : 4 mA ... 20 mA
- Trigger line : 1 x Trigger IN / OUT, 3 VDC ... 30 VDC
- Connections : 1 x 12-pin M16; Optional: 1 x 8-pin M12 for SSI-Interface; Optional: 2 x 5-pin M12 for Profibus DP-V0
- Power supply 10 VDC ... 30 VDC
- Power consumption : < 10 W
- Operating temperature : -40 °C ... 60 °C
- Weight : 100 g
- MTBF : 35,435 hours (MIL HDBK 217 F)