- Oil in Water Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.Polycyclic Aromatic Hydrocarbons Analyzer housing in a robust IP68 proof enclosure, 1500 N tensile strength Kelvar reinforced cable, up to 1.2 km digital data transmission, the Oil in water meter is ideally used in water/wastewater industry.
- Robust IP68 Water Submersible Enclosure, Solution Without Cabinet
- 1 sec On-line Realtime Measurement
- 0.02 W Ultra Low Power Consumption, Ideal for Outdoor Applications
- Temperature Compensation
- High Reliability, Drift Free
- Lightening and Surge Protection for Power and RS485 Communication
- 1.2 Km RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Software Configuration Calibration and Data Monitoring
- Onboard memory allowing users to easily calibrate and configure sensor at lab and distribute to various fields sites
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI, Eliminate I/O Module Cost
Thông số kỹ thuật
- Parameter : Crude oil; Refind fuels,Napthalene, Gasoline, Disel, Benzene, Hydaulic oil
- Measurement range :
+ SMR37-1: 0~50 μg/L(PAH); 0~1.5 mg/L(oil)
+ SMR37-2: 0~500 μg/L(PAH); 0~15 mg/L(oil)
+ SMR37-3: 0~5,000 μg/L(PAH); 0~150 mg/L(oil)
- Accuracy : ±5% FS
- Resolution : 0.01 mg/L
- Repeatability : ±3% FS
- Light source : LED 254 nmS
- Operation pressure : 10 Kgf/cm2
- Operating temperature : 0 ~ 85 °C
- Process flow rate : Min, 0.1m/sec
- Response time : 10 secs
- Temperature sensor : Pt100
- Protection : IP68
- Temperature measurement range : 0~85 °C
- Temperature accuracy : ±0.5 °C; ±0.1 °C (optional)
- Housing : SS316L; Titanium (optional)
- Dimension : Φ35 x 215 mm
- Weight : transmitter: approx. 500 g; cable: 80 g/m