Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

PrismMaster® Comparison - Goniometer

Mã sản phẩm: PrismMaster® Comparison
Sử dụng cho Model:
Hãng SX: Trioptics
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

The PrismMaster Comparison Goniometer is ideal for high precision angular measurement of prisms and other plano optical components in production environment. It measures production samples in comparison to a known reference sample.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683


Thông tin sản phẩm

Featuring measurement times of less than one second per sample the PrismMaster Comparison provides an unbeatable quick result. The first reference measurement is done using a reference prism with known angles. These angles are stored in the software. Using the swivelling arm the autocollimator is positioned to the surface to be measured. Further measurements are made relatively to the angle of the reference prism without further movement of the autocollimator. The results are given as a difference to the reference prism or as an absolute value of the measured angle. Measurements can be done in reflection for outer prism angles and in transmission for internal deviation angles.

Key Features


Autocollimator mounted on stand with swivel arm
Accurate manual fine adjustment with arcsec sensitivity
Stand with hand wheel for convenient swivelling and a scale helping to find the angular position
Second autocollimator for transmission measurements in ground plate
Measurement times of less than one second per sample with pass/fail information
Measurement in reflection for outer prism angles
Measurement in transmission for internal deviation angles
Tilt and rotary sample table with height adjustment for different sample sizes
Sample table comes with three different interchangeable three ball supports


Applications

The Comparison Goniometer is used for angle measurements of any plano optics in production quantities with high speed and consistent accuracy:
any prism angles
wedge angle
90°-angle of prisms
measurement of small or antireflex coated samples
parallelism of plane plates
deviation angle through wedges and prisms
pentaprisms angle
mirror tilt


  PrismMaster® Comparison
Measurement mode reflection and transmission
Measuring range 0-360°
Electronic autocollimator  
ACM mounted on stand EFL 300 mm, Diameter 57 mm, Accuracy 0,01; Repeatability ± 0,1
ACM in ground plate EFL 150 mm, Diameter 30 mm Resolution 0.01; Repeatability ± 0.5
Rotation of the table  
Manual
Automatic (standard)  
System accuracy (in arcseconds)  
Single measurement 0.4


Bình luận