- Active alignment within the range of sub-microns in up to 6 degrees of freedom
- Higher production yield with better image quality
- Highest alignment precision by using special technology and modern arithmetic algorithms
- Complete automated assembly and test line for high volume camera module production – according to customer’s requirements
- Target projection: test chart or/and collimator possible
- High degree of automation: handling, incoming control, cleaning, dispensing, gluing, aligning, curing, end-of-line testing, calibration and sorting
- Corresponding software for process control
- Final MTF quality control
Applications
- Active Alignment and Assembly of Objective Lenses and Image Sensors
| Features |
ProCam® Align Inline |
| Alignment degrees of freedom (DoF) |
up to 6 |
| 6 DoF linear alignment resolution |
< 0.1 µm
|
| Final sample linear alignment accuracy |
< 2 µm |
| 6 DoF tilt alignment resolution |
< 0.1 arcsec |
| Final sample tilt alignment accuracy |
< 2 arcmin |
| Sample Effective Focal Length |
1 to 12 mm (others on request) |
| Sample diameter |
2 to 30 mm (others on request) |
Field of View test chart
Field of View collimators
|
up to 70 °
up to 170 ° |
| Max. UPH (Units Per Hour) |
240* (single head, parallelization possible) |
| Camera interface |
MIPI, SPI, various analog, USB, FireWire, CamLink, GigE, custom (CAN, etc.) |
| Dispense technologies |
several options |
| LED UV cure |
several options |
| Post-curing |
optional (UV/thermal) |
* depending on camera module frame rate, length of curing process and number of different parameters to be measured
|