Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Programmable Multifunctional AC/DC Power Sources NetWave series EM TEST

Mã sản phẩm: NetWave series
Sử dụng cho Model:
Hãng SX: EM TEST
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
The NetWave series (1-phase) are single phase AC/DC power sources, specifically designed to meet the requirements as per the standards IEC/EN 61000-4-13, -4-14 and -4-28. Used as a DC power source it covers the requirements as per the standards IEC/EN 61000-4-17 (Ripple on DC) and IEC/EN 61000-4-29 for voltage dips and interruptions on DC supplies.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Highlights

Wide Power Bandwidth; DC - 5kHz
Output Power up to 7,500VA AC and 9,000W DC
Output Voltage max. 360V AC and +/- 500V DC
High Inrush Current Capability up to 200A
Extended trigger and control capabilities (NetWave 7.3)
Built-in Arbitrary Waveform Generator for easy generation of complexe waveforms
Standard Test Routines for IEC/EN requirements as well as for Aircraft and MIL-STD testing
Built-in voltage and current measurement (option)
Multiple Interfaces



Benefits:

The programmable AC and DC power source with its wide frequency bandwidth offers powerful waveform generation capabilities for various test applications in the EMC area and for avionics testing. Based on a Dual-Processor technology, with an integrated high-performance PC, a digital signal processor (DSP) and equipped with a hard disk the NetWave is capable to generate and record waveforms in realtime.


Its output power with low distortion and high stability, even if supplying dynamic loads, guarantees full compliant measurements for harmonics and flicker testing as per IEC/EN 61000-3-2, JIS C 61000-3-2 and IEC/EN 61000-3-3 as well as per IEC/EN 61000-3-11 and IEC/EN 61000-3-12. The NetWave is well suited for testing inverters of solar and wind power generators and e-vehicles. Additionally, the NetWave offers full capabilities for avionics testing as per DO-160, Airbus ABD0100 and Boeing as well as per MIL-STD-704. 


According to standard requirements a pure sinusoidal voltage is needed for harmonics and flicker measurements. The output voltage of the NetWave is therefore guaranteed to have a very low distortion (THD) of less than 0.1% regardless of the load.





Bình luận