- Electrode type of the conductivity measurement is adversely affected by dirt on the electrode and polarization capacity. To avoid such demerits, this instrument applies the electromagnetic induction type.
- A special construction work and/or equipment are not needed, and user just set the battery case at the top of a monitoring well/hole.
- It makes possible to have superior stability by putting data logger in the water where temperature rarely change. Because of applying the unified probe consisted by the sensor and data logger, it is not affected by exogenous noise
Thông số kỹ thuật
| Measurement range |
Water level : 5, 10, 20, 35 m |
| Conductivit : 2 to 4,000 mS/m |
| Measurement accuracy |
Water level : ±0.1 % FS |
| Conductivity : ±3 % FS (in case of 25 degree C) |
| Memory capacity/th>512 KB (32,000 data) |
| Interface |
RS-232C |
| Communication speed |
9,600 bps |
| Measurement rates |
1 minute to 10 days |
| Power source |
6 V dedicated lithium battery |
| Operation temperature range |
Probe : 0 to +50 degree C |
| Buttery : -30 to +60 degree C (without freeze) |
| Material |
Pressure sensor : Titanium |
| Probe |
Vinyl chloride |
| Size |
φ34 × L547 mm |
|