| FEATURES |
 |
| ■ |
Low noise floor(-117dBm @ 1GHz, 3kHz RBW) |
| ■ |
Auto set Function |
| ■ |
Sequence Programming Functions |
| ■ |
Auto Measurement Functions for ACPR, OCBW, N-dB, Phase jitter |
| ■ |
Phase/Fail Test with Limit Line Editing |
| ■ |
5 Markers with ΔMarkers |
| ■ |
Frequency Compensation Function |
| ■ |
Split Windows Allow Separate Settings |
| ■ |
Multi-Mode Power Operation for AC / DC / Battery |
| ■ |
Multi-Language Operation for English and Chinese |
| ■ |
Interfaces for USB, RS-232C, GP-IB (option) |
| ■ |
VGA Output Terminal on Rear Panel |
| ■ |
6.4" TFT Color LCD, Resolution: 640×480 |
| ■ |
Dimensions : Approx. 330(W)×170(H)×340(D)mm |
| ■ |
Weight : Approx. 5.8kg without Options |
| ■ |
Optional Tracking Generator & Preamplifier |
| * |
The application program is attached. |
| FREQUENCY |
| Frequency Range |
9KHz to 3GHz |
| Aging Rate |
1ppm/yr,±1ppm(10-6) (0 to 50ºC) |
| Span Range |
2kHz to 3.0GHz in 1/2/5 sequence, full span, zero span |
| Phase Noise |
-80dBc/Hz @ 1GHz 20kHz Offset typical |
| Sweep Time Range |
50ms to 25.6s |
| • RBW Range |
3kHz, 30kHz, 300kHz, 4MHz |
| • RBW Accuracy |
15% |
| • VBW Range |
10Hz to 1MHz in 1-3 steps |
|
| AMPLITUDE |
| Measurement Range |
-103dBm to +20dBm:1MHz to 15MHz, Ref. Level ≥-30dBm
-117dBm to +20dBm,15MHz to 1000MHz,Ref. Level ≥-110dBm
-114dBm to +20dBm,1000MHz to 3000MHz,Ref. Level≥-110dBm
(span=50kHz,RBW=3KHz) |
| Overload Protection |
+30dBm, 25VDC Max |
| accuaracy |
±1dB@100MHz |
| Frequency Flatness |
±1dB(Out of range : 9kHz to 1MHz) |
| Display Range Linearity |
±1dB (70dB over) |
| |
dBm,dBmV,dBµV |
| Reference Level Range |
-110dBm to +20dBm |
|
| DYNAMIC RANGE |
| Average Noise Floor |
-135±1dBm/Hz : 1MHz to 15MHz, Ref. Level ≥-30dBm
<-149dBm/Hz,typical -152dBm/Hz.15MHz to 1000MHz,
Ref Level ≥ -110dBm
<-146dBm/Hz,typical -149dBm/Hz,1000MHz to 3000MHz,
Ref Level≥110dBm |
| Third Harmonic Distortion |
<-70dBc RF Input @-40dBm ,Ref Level @-30dBm |
| Harmonic Distortion |
<-60dBc RF Input < -40dBm,Ref Level @-30dBm |
| Non-Harmonic Spurious |
<-93dBm,1MHz to 15MHz,Ref Level ≥ -30dBm;
<-107dBm,15MHz to 1000MHz,Ref Level ≥-110dBm;
<-104dBm,1000MHz to 3000MHz,Ref Level ≥-110dBm;
(span=50kHz,RBW=3KHz) |
|
| GENERAL |
| Display |
640×480 high-resolution TFTcolor LCD |
| Internal Memory |
10Traces,10Setup Info,10Limit Lines,5 Corrections,10 Sequences |
| Markers |
5 markers for peaks: 5 normal-delta marker pairsFunctions: Delta,
To Peak,To Minimum,Peak Table,Peak Sort |
| Trace Detection |
3 traces with Peak, Maximum hold, Freeze, Average,
and Trace Math |
| Auto Measurement |
ACPR, OCBW, Channel power, N dB , and Phase Jitter |
| Autoset Function |
Auto tuning the measurement result for observation |
| Sequence |
Automated test by user defined macros without any remote control |
| Connectors |
| • RF Input |
Type : N Female, 50_ nominal RF input VSWR: <2:1, @0dBm Ref Level |
| • External Reference Clock Input |
Type : BNC Female, 1M, 1.544M, 2.048M, 5M, 10M,
10.24M, 13M, 15.36M, 15.4M, 19.2M |
| • External Trigger Input |
Type : BNC Female, +5V TTL signal |
| • Ref. Clock Output |
Type : BNC Female, 10MHz |
| • RS-232C |
D-Sub 9pins Female |
| • VGA Output |
D-Sub 15pins Female |
| • USB Connector |
Front Panel : Type A
Rear Panel : Type B mini |
| • DC Voltage Output |
SMB Male, +9V/100mA max output |
| Power Source |
| • AC Input |
100V to 240V, 50/60Hz,90W |
| • DC Input |
Jack : 5.5mm, 12V |
| Accessories |
User Manual ×1, Power Cord ×1,USB,Cord,CD Disc(PC Softwear) |
| Dimensions |
330(W)×170(H)×340(D)mm |
| Weight |
Approx. 6kg |
| Atmospherics |
| Ambient Temperature |
18ºC to 28ºC for operation
0ºC to 40ºC for storage |
| Relative Humidity |
<90% for operation
<85% for storage |
|
|