| Frequency |
10 Hz to 1 MHz, continuously adjustable. |
| External Trigger |
Requires 1 volt, positive pulse. |
| Single Cycle |
One pulse occurs each time the push button is pressed. |
| Single/Double Pulse |
This toggle provides for a pulse pair whose separation is varied by the delay controls.
Minimum separation is 50 ns.
|
| Rise Time of Output (10-90%) |
20 ns to 50 us (in 11 steps), exponential shape and independent of decay time. |
| Decay Time Constant of Output(100-37%) |
50 ns to 1000 us (in 11 steps), exponential shape and independent of risetime for decay/rise time >10. |
| Trigger Out |
Positive 3 volt pulse, 10 ns rise time, 0.2 us witdh, 50 ohms output impedance. |
| Delay |
-50 ns advance to 10 ms delay (between Trigger Out and leading edge of output pulse). |
| Output Amplitude |
Zero to 9.99 volts maximum. Adjustable by ten-turn potentiometer. |
| Attenuator |
X10 and X100 providing up to 1000: 1. |
| Integral Linearity of Output |
±0.1%. |
| Duty Factor Effect |
Amplitude shift less than 0.1% below 30% duty factor. Duty factor in percent for tail pulses is defined as: (8 decay time constants/pulse spacing) X100. |
| Output Polarity |
Positive or negative. |
| Output Impedance |
50 ohms. |
| External Reference Input |
±15 volts max. |
| Jitter of Frequency and Delay |
Less than 0.1%. |
| Temperature Coefficient of Output |
Less than 0.03%/°C. |
| Amplitude Jitter (Resolution) |
Less than 0.01% peak, 0.002% rms of pulse amplitude. |
| Power Required |
+24 V at 50 mA, -24 V at 50 mA, +12 V at 175 mA, -12 V at 80 mA. |
| Mechanical Dimensions |
Double-witdh AEC module, 2.70 inches wide by 8.70 inches high. Conformsto AEC Report TID-20893 (Rev. 2). |
| Weight |
3.5 lbs. net, shipping 7 Ibs. |