| Measuring Range with FH4 Probe |
0 - 6 mm (0 - 0.236"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement |
| Measuring Range with FH4-1MM Probe |
0 - 6 mm (0 - 0.236"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement (Includes additional calibration with 1mm diameter non-magnetic balls for use in small concave areas) |
| Measuring Range with FH4-M Probe |
0 - 9 mm (0 - 0.345"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement |
| Measuring Range with FH10 Probe |
0 - 13 mm (0 - 0.512"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement |
| Measuring Range with FH10-M Probe |
0 - 24 mm (0 - 0.945"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement |
| Accuracy with FH4 Probes |
0-1.5mm: ±(3 µm + 1% of reading)
0-2.5mm: ±(5 µm + 1% of reading)
0-4.0mm: ±(10 µm + 1% of reading) |
| Accuracy with FH10 Probes |
0-4.0mm: ±(5 µm + 1% of reading)
0-7.0mm: ±(10 µm + 1% of reading)
0-10.0mm: ±(20 µm + 1% of reading)
0-13.0mm: ±(20 µm + 1% of reading)
0-16.0mm (magnetic): ±(40 µm + 2% of reading)
0-24.0mm (magnetic: ±(60 µm + 2% of reading) |
| Low Range Resolution |
FH4: 0.1 µm
FH10: 0.2 µm |
| Repeatability |
Better than ± (1 µm + 0.5 % of reading) |
| Measuring Principle |
Magnetostatic |
| Logging Rate |
1, 2, 5, 10, 20 readings per second (selectable) |
| Data Memory |
FH7200: 100,000 values
FH7400: 240,000 values |
| Calibration Modes |
Factory, Zero, Zero + up to 4 points |
| Measuring Units |
Metric: µm, mm
Imperial mils, inch |
| Statistical Charting |
Numeric, trend, and histogram (with MiniTest 7400 FH only) |
| Interfaces |
USB + IrDA 1.0 |
| Operating temperature |
-10 °C to +60°C (Storage temperature: -20°C to +80°C) |
| Dimensions |
153 mm x 89 mm x 32 mm |
| Weight |
310 grams |