Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị đo đồng trục Fixturlaser Geomatry XA - Bore Measurements

Mã sản phẩm: Fixturlaser Geomatry XA - Bore
Sử dụng cho Model:
Hãng SX:
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Thiết bị cân chỉnh đồng trục

Model  : Fixturlaser Geomatry XA - Bore Measurements

Hãng sản xuất : Fixturlaser

Xuất xứ  :Thụy Điển


Yêu Cầu Giá Tốt

Thông tin sản phẩm

Thiết bị cân chỉnh đồng trục

Model  : Fixturlaser Geomatry XA - Bore Measurements

Hãng sản xuất : Fixturlaser

Xuất xứ  :Thụy Điển

The Fixturlaser XA Geometry package shares many of the advanced technology components and functions with the much appreciated Fixturlaser XA shaft alignment system. The graphical user interface is icon based facilitating interpretation. It has the same animated color screen with color coded vales and results, and the green arrows showing in which direction to move the machine or the measurement object.

The system is wireless for express data transfer; i.e. no cables between transmitters, detectors ad the display box, so that you can move around in freedom when recording measurement points or during adjustments. The documentation of measurement reports s handled via the USB ports for transfer to a PC. i.e. no need for additional external software or hardware.

BORE MEASUREMENT

Straightness with the Clock Method
when measuring straightness with the clock method, you set the laser beam roughly parallel to a centre line. Two points can be used as references. The program allows for up to 99 points to be measured.

Typical applications are full bore measurements, e.g. bearing journals for compressors and in diesel engines.

 Straightness with the Arc Angle Method

Straightness measurements with the Arc Angle method are made by setting the laser beam roughly parallel to a centre line. Two points are used as references. The program allows for up to 99 points to be measured.

The sensor is placed in three to nine positions at each measurement point to find the centre of the measurement object. For the Arc Angle measurements the detector is in a single-axis mode.

Typical applications are half bore measurements, e.g. compressors and turbines with split casings.


 Intrinsically safe classification EEx ib IIC T4, ATEX code: II 2 G
 Printer facilitates recording of alignment activities
 Maximum distance of 1 m (3 ft) between the measuring units makes it suitable for aligning most applications
 Display unit provides realtime values during the alignment process making rechecking alignment unnecessary
 User-friendly display unit with only five buttons



Bình luận