The Model 211XL and 212XL Surveyorstats utilize chopper-stabilized sensors for long-term, accurate measurements in both normal and ionized environments. The static meters are similar and differ only in display and measurement range. The Meters are calibrated in Volts/inch. A push-push MEASURE/HOLD switch holds the last reading when depressed and lights a red LED. An optional momentary switch is available. Meter zero is user adjustable. The meters are housed in a compact, conductive case. A 10’ (3m) ground cord with banana plug and plug-in alligator clip is included. An optional 2mm recorder output cord with flying leads is available for connection to a recording device.
A unique combination of an ETS Model 211 or 212 Static Meter with the sensor removed and housed in an aluminum case that is mounted onto an extendable arm with a fully adjustable, locking swivel mount. The pivoting mechanism allows the user to set the sensor at any angle or position relative to the surface being measured. A coiled cord, expandable to 6’ (1.8m), connects the sensor to the meter. A locking 5-pin DIN connector enables the sensor to be easily removed for remote mounting or for service.
Thông số kỹ thuật
- Static Locator with MEASURE/HOLD function
- Sensor extends to 3″ (.9 m)
- Sensor swivels for optimum orientation
- Measurement range @ 1″ (25 mm):±20 kV for Model 212XL±1/10 kV for Model 211XL
Choice of readouts:3½-Digit LCD for Model 212XL10-LED bargraph for Model 211XL
- Chopper stabilized sensor
- Polarity, range & BAT LO indication
9V battery operation
Xem thêm: Thiết bị đo tĩnh điện 205C and 205C-X10 ETS