Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị đo tốc độ vòng quay FT-2500 Onosokki

Mã sản phẩm: FT-2500
Sử dụng cho Model:
Hãng SX:
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng


Tên SP: Thiết bị đo tốc độ vòng quay FT-2500 Onosokki

Mã SP: FT-2500

Hãng: Onosokki

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm


Input section
Applicable sensor FT-0501, IP-292/296, IP-3000A/3100, VP-202/1220, OM-1500/1200
Constant Current Line Drive sensors, microphones, accelerometers and so on.
Measurement section
Measurement mode

1.Steady rotation measurement mode
・Frequency range: 500 Hz, 2 kHz, 10 kHz
・Resolution =Frequency range ÷ 12800 × 60 ÷set pulse count

2.Rotation acceleration/deceleration measurement mode
・Frequency range: 250 Hz, 500 Hz, 2 kHz
・Resolution=Frequency range ÷ 6400 × 60 ÷set pulse count

Rotating direction acknowledgment Available when FT-0501 is in use.
Measurement accuracy ±2 x rotating speed resolution ±1 count
Averaging processing Moving average processing, allowable count: OFF, 2, 4, 8, 16
Filter function Can be set voluntary (Specifying each one of upper and lower rotating speeds.)
Display section
Display update time 0.5 ±0.2 second
Measurement display range 0 to 999,999 r/min(0 to 10,000 Hz)
Output section
Analog output voltage range 0 to 10 V/0 to F.S.
Rotational speed can be specified voluntary at 10 V output.
Analog output update time Steady rotation measurement mode: 500 ms or less
Rotation acceleration/deceleration mode: 250 ms or less
Sensor signal output for monitoring Sensor signal output for monitoring
(The output can be selectable from analog or monitor output.)
Comparator output Upper/lower-limit determination, rotating direction acknowledgment, OK determination
Output method: semiconductor relay (3 circuits are built-in.)
Pulse output Output the frequency equivalent to the displayed rotational speed x set P/R
(Hi: 4.5 V or more, Lo: 1 V or more)
External interface RS-232C, External command input connector, Ethernet (option)
Memory section
Condition memory Saving 3 kinds of setting conditions.
General specifications
Power requirement 100 to 240 VAC(50/60 Hz)
Power consumption 32 A or less
Operating temperature range 0 to +40 °C
Storage temperature range -10 to +55 °C
Outer dimensions 144(W) × 72(H) × 180(D) mm
Weight Approx. 1.2 kg
Accessories Panel mounting fixture, stand foot, rubber foot, connector (D-SUB <15-pin, plug>), Power cable (3P-3P, 1.9-m) .......... (1 pc. for each)
Option
AX-5022 RS-232C cable
FT-0100 Analog output cabel(1.5m R03PB3M-BNC245)
FT-0110 Pulse output cabel(1.5m D-SUB15PIN-BNC245)
FT-0251 Ethernet communication function (RS-232C function cannot be used when Ethernet option is equipped.)


Bình luận