- The pressure test pump LR-Cal LPP 08 is used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements in the low-pressure and vacuum range. The pressure tests may be carried out in laboratories, workshops or on site at the measuring point.
- The LR-Cal LPP 08 is a pneumatic pressure test pump for low-pressure ranges up to 8 bar with change-over switch to vacuum down to -850 mbar. Despite its compact dimensions, the pressure test pump is easy to operate and allows for exact generation of the required test pressures. The maximum pressure or vacuum achievable depends on the attached test volume. The smooth-running pressure generation and the integrated fine adjustment valve allow a safe and precise setting of very small positive resp. negative pressure values in the range of mbar.
- Pressure test pump LR-Cal LPP 08
- T-piece, one side with 1/8" BSP male thread for direct mounting to the pressure test pump, other sides with quick hose connectors (Push&Pull) for pneumatic hose 4 x 2 mm. Easy mounting thanks to supplied o-ring. Max. torque 15 Nm.
- 2 pcs. pneumatic hose 4 x 2 mm, each length 0.5 m
- 2 pcs. quick connectors (Push&Pull) with 1/8" BSP male thread, for hose 4 x 2 mm
- 1 Adapter 1/8" BSP female x 1/2" BSP female, for connecting reference instrument (with 1/2" BSP male thread)
- Thanks to integrated o-ring tightening without tools, just by hand
- 1 Adapter 1/8" BSP female x 1/4" BSP female, for connecting unit under test (with 1/4" BSP male thread)
- Thanks to integrated o-ring tightening without tools, just by hand
- Operating manual
Thông số kỹ thuật
-Pressure generation: 0 to 8 bar = 0 to 116 psi, switchable to
-Vacuum generation: 0 to -0.85 bar = 0 to -25 inHg
- Pressure ports (standard version):
+ For reference measuring instrument: 1/2" BSM female, with o-ring, via hose and t-piece
+ For unit under test: 1/4" female, with o-ring, via hose and t-piece
- Medium: Ambient air
- Priming pressure: Ram
- High pressure: Volume adjustment valve
- Fine pressure adjustment: Volume adjustment valve (very sensitive)
- Dimensions: approx. 180 x 111 x 31 mm (without T-piece)
- Weight: approx. 295 g (without T-piece)
- Order-Code: LPP-08