- The pressure test pump LR-Cal LPP 60 is used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.
- If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 60 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.
- Despite its compact dimensions, the pressure test pump LR-Cal LPP 60 is easy to operate and allows for exact generation of the required test pressures; a change-over switch enables the generation of vacuum as well. The LR-Cal LPP 60 is fitted with a fine adjustment valve for generation of high pressure and a precise adjustment of pressures.
Thông số kỹ thuật
- Pressure generation: 0 to 60 bar = 0 to 870 psi, switchable to
- Vacuum generation: 0 to -0,95 bar = 0 to -28 inHg
- Pressure ports (standard version):
+ For reference instrument: 1/2" BSP female, freely rotating, with integr. O-ring, on the top of the pump
+ For test item: 1/4" BSP female, freely rotating, with integr. O-ring, at the pressure test hose of the pump
- Materials: Aluminium, brass, ABS, NBR
- Priming pressure: Hand lever
- High pressure: Volume adjustment valve
- Fine adjustment: Volume adjustment valve (fine adjustment, large volume)
- Dimension: approx. 290 x 185 x 65 mm
- Weight: approx. 960 g
- Order-Code: LPP-60