Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị hiệu chuẩn dòng điện, áp suất 7040 Time Electronics

Mã sản phẩm: 7040
Sử dụng cho Model:
Hãng SX: Time Electronics
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Vacuum to 20bar versions
0.04% accuracy
Loop current calibration
9 engineering units
Min / Max function
Leak rate function
RS-232 serial interface

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

The 7040 is a portable pressure calibrator suitable for workshop, laboratory and field use. With the capability to measure process loop current and pressure, devices such as transmitters and converters to be calibrated directly. Basic accuracy is 0.04%. Pressure can be displayed in any of nine popular engineering units; Bar, PSI, KPa, inWg, cmWg, inHg, mmHg, Kg/cm2, and Atm.


Loop current can be displayed in mA, or as a percentage of span (4-20mA). A min/max logging function (pressure or loop current) is provided.
The min or max values can be recalled to the display and if required can be viewed in real time. An additional feature is leak rate display. This allows the actual leakage rate to be observed in real time in the selected 'pressure units' per sec, or per min.


By connecting the 7040 to a PC or laptop via RS232 and using a suitable program (see EasyCal calibration software) the displayed parameters can be read back: Pressure, Loop Current, Max Value, Min Value. By arranging for the program to store these values in a database a full data logging set-up is possible.


The display is 4.5 digit LCD and power is via a 9V PP3 battery. The 7040 is supplied with pneumatic fittings kit and hose, test leads, technical manual, RS232 lead, and carry case.


Power

PP3 battery, life 50 hours continuous use 

Displays

Pressure display: In one of 9 user selectable units
Loop current display: In mA or % of 4 - 20mA
Leak rate display: In pressure units per sec, or per minute, as selected in user set-up Max/Min logging display 

Interfaces RS-232 for readback and re-calibration (software not supplied)

Front panel

Polycarbonate membrane keypad

Case Structural resin which is weather-proof to IP66 standard
Operating Temperature 0 to 50°C
Storage Temperature -10 to 60°C

Dimensions

H157 x W90 x D33mm 

Weight

0.29kg

Supplied With

Carry case, Pneumatic fittings kit and hose, Test lead, Serial link cable 

Optional Extras

Pneumatic hand pump, EasyCal calibration software, and calibration certificates 

Country of Origin UK


Bình luận