Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị hiệu chuẩn nhiệt độ CPB5600-DP Met One

Mã sản phẩm: CPB5600-DP
Sử dụng cho Model:
Hãng SX: Met One
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Applications:


Reference instrument for the calibration of differential pressure measuring instruments under static pressure
Primary pressure standard for calibration laboratories and factory, for the testing, adjustment and calibration of differential pressure instruments
Complete stand-alone system, also suitable for on-site use

Thông tin sản phẩm

PNEUMATIC 
Range 1) 2) 6)
bar 12:03 ... 2 0.2 ... 10 0.4 ... 50 0.4 ... 100
Required masses kg ten ten ten 20    
Smallest Step 3) bar 12:01 12:05 12:25 12:25    
Sensitivity 4) mbar 0002 12:01 12:05 12:05    
Nominal cross-sectional area of the piston mm² 5 first 0.2 0.2    
PNEUMATISC 
Range 1) 2) 6)
psi 0435 ... 30 2.9 ... 150 5.8 ... 500 5.8 ... 1000 5.8 ... 1500
Required masses kg ten ten 7 13 20  
Smallest step 3) psi 0.2 first 5 5 5  
Sensitivity 4) psi 0.00003 0.00015 0.00075 0.00075 0.00075  
Nominal cross-sectional area of the piston cm² 5 first 0.2 0.2 0.2  
HYDRAULIC
Range 1) 2) 6)
bar 0.2 ... 60 0.2 ... 100 1 ... 250 1 ... 400 2 ... 600 2 ... 1,000
Required masses kg 30 50 25 40 30 50
Smallest step 3) bar 0.1 0.1 0.5 0.5 first first
Sensitivity 4) mbar 12:04 12:04 0.2 0.2 0.4 0.4
Nominal cross-sectional area of the piston cm² 0.5 0.5 0.1 0.1 12:05 12:05
HYDRAULIC
Range 1) 2) 6)
psi 2.9 ... 1000 14.5 ... 5,000 29 ... 10,000 29 ... 14,500
Required masses kg 34 34 34 50    
Smallest step 3) psi 2 ten 20 20    
Sensitivity 4) psi 0006 0003 0006 0006    
Effective area cm² 0.5 0.1 12:05 12:05    
Accuracy 7) % of
measured
value
proportion of static pressure: 0.0001
proportion of differential pressure: 0.015 / optional: 0.008
(high-pressure hydraulic version: 0.025 / optional: 0.020)
Lower limiting value of measurement uncertainty   depends on range; corresponds to sensitivity of piston
Basement versions
Pneumatic   up to 100 bar / 1,500 psi; with priming pump, spindle pump and port for external pressure supply
Pneumatic with separator   up to 400 bar / 5,000 psi; for external pressure supply, with integrared separator air on oil
Hydraulic   up to 1,000 bar / 14,500 psi; with internal pressure supply
up to 1,200 bar / 17,400 psi: on request
Pressure ports
Piston-cylinder-unit   Quick-fit connection for basement versions pneumatic and hydraulic;
M30 x 2 male thread for basement version pneumatic with separator
Test item   2 pcs. quick-fit connections 1/2" BSP female rotating, other threads see accessories
Pressure medium
Pneumatic   clean and dry non-corrosive gases (e.g. air or nitrogen)
Hydraulic   special oil (1 l included in supply)
Oil reservoir cm² 250
External pressure supply   6 mm SWAGELOK (R) tube fitting; max. 110% of used pressure range (only for basement version pneumatic or version pneumatic with separator)
Materials
Piston   Tungsten Carbide
Cylinder   Tungsten Carbide
Set of masses   Stainless steel 1.4305 and aluminium, non-magnetic
Tubes / pipes in basement
Pneumatic   Stainless steel 1.4571, 3 x 1 mm
Hydraulic   Stainless steel 1.4404, 6 x 2 mm
Operating conditions
Operating temperature ° C 18 ... 28
Weight
Basement pneumatic kg 34.0
Basement pneumatic with separator kg 32.0
Basement hydraulic kg 38.5
Piston-cylinder-unit kg 1.5 (5.7 incl. bell jar and base weight, in optional carrying case (2 units required)
BAR weight set, pneumatic kg 32.4 (incl. 2 wooden cases)
BAR extension weight set, pneumatic kg 28.0 (incl. 2 wooden cases)
BAR weight set, hydraulic kg 72.0 (incl. 2 wooden cases)
BAR extension weight set, hydraulic kg 48.0 (incl. 2 wooden cases)
PSI weight set, pneumatic kg 25.0 (incl. 2 wooden cases)
PSI extension weight set 1, pneumatic kg 22.0 (incl. 2 wooden cases)
PSI extension weight set 2, pneumatic kg 37,0 (incl. 2 wooden cases) only for range 1,500 psi
PSI weight set, hydraulic kg 84,0 (incl. 2 wooden cases)
PSI extension weight set, hydraulic kg 43,0 (incl. 2 wooden cases)
Dimensions
Basement mm W 800 x D 375 x H 265
Wooden case for weight set mm W 400 x D 310 x H 310
Wooden case for extension weight set mm W 215 x D 310 x H 310
Optional case for piston-cylinder-unit mm W 300 x D 265 x H 205
Certificates
EC-Conformity   97/23 EG (module A), only for versions above 1,000 bar
Calibration   Factory Certificate of Calibration (optional: DKD-/DAkkS-Certification), traceable

Bình luận